A N T E N N A I N S T A L L A T I O N; I N S T A L L I N G B E L T C L I P - TYT TH-UVF 9 User Manual

A n t e n n a I n s t a l l a t i o n
T h e supplied high gain antenna provides high performance at the entire V H F / U H F frequency
range of the transceiver.
T o install the supplied a n t e n n a , hold the bottom
end of the a n t e n n a , then s c r e w it onto the TT
connector on the transceiver until it is s n u g .
Do not over-tighten by use of e x t r e m e force.
Picture 3
T o uninstall the a n t e n n a , hold the bottom end of
it and turn it counterclockwise to r e m o v e it.
Picture 4
Notes: • Never transmit without having an antenna
connected.
m When installing the supplied antenna,
never hold the upper part of the antenna
while screwing it onto the connector on the
transceiver. Or you may snap the antenna.
Picture 3 Picture 4
98!
I n s t a l l i n g B e l t C l i p
Align the two holds of belt clip a n d the two holes of the radios, fix t h e m with the supplied
M2.5x5 s c r e w s . Loosen the s c r e w set to r e m o v e belt clip.
Picture 5, Picture 6
Picture 5 Picture 6