McIntosh MX151 Owner's Manual page 31

INSTALLER MENU SUB MENU
Audio Processing Setup
Advanced Audio Setup
Zone B Setup
Power
Volume Mode
Set Volume
Video Output
Max volume
Startup Screen
Edit Zone B Sources
SELECTION OPTION(S)
RP Bypass No, Yes
Lipsync 0-400ms
HDMI Audio Out Silent, Off, On
Mch. AD LFE Gain 0dB, +10dB
Independent, Follow Zone A
User, Fixed, Wakeup
0-99%
Zone B, Independent, Zone A
0-99%
Use last, or any currently
available Input
Name: a-z, A-Z, 0-9, plus additional
characters
Video In None, Component 1-5
DESCRIPTION
Bypasses the audio signal around RoomPerfect
Correction; Bypass is available as a Trim Func-
tion and as an option in the User Menu
Delays the audio signal to be in synchronization
with the video signal
Silent-mode sends a zero bit audio stream to
the TV/Monitor, Off-mode sends no audio bit
stream, On-passes the source component's audio
bit stream to the TV/Monitor
Affects the Analog Multichannel Sub Input only,
corrects reduction in output level from some
DVD Players
Zone B switches On/Off independently or
switches On/Off when Zone A switches On/Off
Retains the last volume setting, allows for a
fixed volume setting (used to provide an output
for recording purposes), Zone B wakes up to the
same volume setting when switched On
Used to set Zone B Output Level when Zone B
Volume Mode is set to Fixed or Wakeup
Zone B Input Control select video source, ex-
ternal control (via RS232 connection) can select
a different video source than the selected audio
source, same video source as selected for Zone
A
Zone B maximum volume
Allows which input Zone B wakes up to
Customize the Input Source Name
Zone B component video input source
Setup Mode, con't
SETUP SHEET NO.
4
4
4
4
5
5
5
5
5
5
5
5
31