McIntosh MX151 Owner's Manual page 23

Speaker Configuration
L M
C M
R M
RS M
RBS M
LBS M
Back
Figure 12
Speaker Configuration
LBS M
LS M
SUB Sub 80
AUX1 L -
AUX2 R -
AUX3 L -
Back
Figure 13
Speaker Configuration
AUX2 R -
AUX3 L -
AUX4 R -
Edit/Select
Verify Current Setup
Back
Figure 14
then press the SELECT Push-button. Refer to
‡
figure 15. Press the SELECT Push-button again.
Refer to figure 16.
7. The "Select Perf." Menu will appear, then use the
L
Bass perform
Bass cutoff
Bass order
Gain offset
ˆ
Back
‡
Select Perf.
-
XXL
XL
L
ˆ
M
S
XS
‡
Custom
Back
Upp or Downq Push-buttons to highlight the "L"
(for large) menu item for the Left Front Loud-
speaker. Then press the SELECT Push-button.
ˆ
Refer to figures 16 and 17.
‡
M
80Hz
4th LiRi
0.0dB
ˆ
Figure 15
‡
ˆ
Figure 16
L
Bass perform L
Bass cutoff 40Hz
Bass order 4th LiRi
Nat. roll-off No
Gain offset 0.0dB
Back
Figure 17
8. Return to the "Speaker Configuration" Menu by
pressing the SETUP Push-button. Scroll down to
"Save Changes" by using the Downq Push-button
and then press the SELECT Push-button to save
the change. Refer to figure 18. If no changes are
to be saved, press the SETUP Push-button. The
"Confirm Exit" will appear On-Screen and select
"Yes". Refer to figure 19 on the next page.
Note: Once changes have been saved, any additional
changes will first require selecting the "Edit/
Select" again.
Speaker Configuration
AUX1/2 (L/R) -
AUX3/4 (L/R) -
Load Config
Create New Config
Save Changes
Abort (no changes saved)
Figure 18
Setup Mode
‡
ˆ
‡
ˆ
23