Adjusting The Sound - JVC RC-EZ38S Instructions Manual

ADJUSTING THE SOUND

PHONES (on the rear)
Adjusting the volume
Press VOLUME + or VOLUME – to increase or
decrease the volume.
You can press VOL 5 or VOL ∞ on the remote control
unit to increase or decrease the volume respectively.
The volume level can be adjusted in 41 steps (VOLUME
MIN, 01, 02, ... 39, VOLUME MAX).
Note:
The volume level is automatically adjusted to 15 when
the unit is turned on.
Turning off the sound temporarily
During playback, press MUTING on the remote
control unit.
The sound is turned off and
window.
To restore the sound, press MUTING again.
Listening through headphones
Connect a pair of headphones to the PHONES jack.
No sound comes out of the speakers anymore. Be sure to
turn down the volume before connecting headphones.
8
EQ HBS VOLUME +/–
appears in the display
MUTING
STANDBY /
ON
CD
RANDOM
MUTING
1
4
7
9
REMOTE CONTROL UNIT
Reinforcing the bass sound
You can enjoy powerful bass sound with the Hyper-Bass
Sound effect.
Press HBS once to turn on the effect.
To turn off the effect, press HBS one more time.
When HBS is pressed, "HBS ON" or "HBS OFF" is
displayed.
Selecting the sound modes
You can select one of the 5 preset sound modes.
JAZZ : Good for jazz music.
ROCK : Boosts low and high frequency. Good for
acoustic music.
POP : Good for vocal music.
CLASSIC: Good for classical music.
FLAT : Normal sound.
To select the sound mode
Press EQ repeatedly until the indicator for the sound
mode you want appears in the display window.
Each time you press the button, the sound mode changes
as follows:
JAZZ
FLAT
CLASSIC
EQ
MENU/
/ TAPE FM MODE
TUNER/
USB BAND
STOP/
ENTER
PROGRAM /
REPEAT PRESET
SLEEP EQ
2 3
5 6
8
VOL 5/∞
VOL
0
ROCK
POP