Installing Or Replacing A Pci Card - Lenovo ThinkStation D30 User Manual

Installing or replacing a PCI card

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to install or replace a PCI card, an Intel Solid-State Drive 910
Series or an Intel Xeon Phi Coprocessor 3120A PCI Express card. Your computer has two standard PCI card
slots, two PCI Express x4 card slots, and two PCI Express x16 graphics card slots.
Note: If you want to use an NVIDIA compute card, ensure that your computer also has an NVIDIA graphics
card installed.
To install or replace a PCI card, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 38.
3. Open the PCI card retainer by lifting the retainer and then pivoting it out.
Figure 12. Opening the PCI card retainer
4. Depending on whether you are installing or replacing a PCI card, do one of the following:
• If you are installing a PCI card, remove the appropriate metal card slot cover.
• If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it
out of the card slot.
40
ThinkStation D30 User Guide