Connecting the charging cradle (if included)
If you need to disconnect the plug from the charging cradle,
press the release button
Setting up the handset for use
Inserting the batteries and closing the battery cover
Use only the rechargeable batteries (
tions GmbH. Never use conventional (non-rechargeable) batteries, as this could result in
significant health risks and damage to property. For example, the outer casing of the bat-
teries could be destroyed or the batteries could explode. The phone could also malfunc-
tion or be damaged as a result of using batteries that are not of the recommended type.
¤
Insert the batteries the right way
round.
The polarity is indicated in/on
the battery compartment.
If you need to open the battery cover, for
instance to replace the batteries, place
your fingertip in the grooved area on the
top of the cover and slide down.
2
1
and disconnect the plug 2.
1
The display is protected by a plastic film.
Please remove the protective film!
Warning
5
¤
Connect the flat plug from the power supply 1.
¤
Plug the mains adapter into the plug socket 2.
¢
page 13) recommended by Gigaset Communica-
¤
Slide the battery cover back into the
main casing until it clicks into place.
2
1
+ –