Yamaha F9.9B Owner's Manual page 91

www.reelschematic.com
F9.9
T9.9
y
e
t
y
001559
q
w
r
t
e
001549
EMU00997*
q
Removing the Propeller
1) Straighten the cotter-pin 1 and pull it
out using a pair of pliers.
2) Remove the propeller nut 2 and wash-
w
er 3.
3) Remove the deflector 4 (for T9.9), pro-
peller 5 and thrust washer 6.
EMU00998*
Installing the Propeller
cC
8 Be sure to install the thrust washer
before installing propeller, otherwise,
lower case and propeller boss may be
damaged.
8 Be sure to use a new cotter pin and
bend
Otherwise, the propeller could come
off during operation and be lost.
1) Apply Yamaha Marine grease or a cor-
rosion resistant grease to the propeller-
shaft.
2) Install the thrust washer and propeller
on the propeller shaft. Install the deflec-
tor (for T9.9) on the propeller.
3) Install the washer and tighten the pro-
peller nut to the specified torque.
the ends over
E
securely.
4-22