General - Sony STR-DA3200ES Service Manual

STR-DA3200ES/DG1000
(DA3200ES: US, Canadian models)
Front panel
To remove the cover
Press PUSH.
When you remove the cover, keep it out of
reach from children.
Name Function
A POWER
Press to turn the
receiver on or off.
B AUTO CAL MIC
Connects to the
jack
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
C TONE MODE
Adjusts FRONT BASS
and FRONT TREBLE.
TONE
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
D Remote sensor Receives signals from
remote commander.
Rear panel
A AUDIO INPUT/OUTPUT section
L AUDIO IN/ Connects to a tape
OUT jacks deck, MD deck or
R
DAT player, etc.
MULTI Connects to a Super
CHANNEL Audio CD player or
INPUT jacks DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound.
PRE OUT jacks Connects to an
external power
amplifier.
B DIGITAL INPUT/OUTPUT section
OPTICAL IN/ Connects to a DVD
OUT jacks player, Super Audio
CD player, etc. The
COAXIAL jack
COAXIAL IN
provides a better
jacks
quality sound.
HDMI IN/OUT Connects to a DVD
jacks player, or a satellite
tuner. An image and
the sound are output
to TV or a projector.
10
SECTION 2

GENERAL

Name Function
E MEMORY/
Press to operate a tuner
ENTER (FM/AM/XM).
TUNING MODE
TUNING
F CATEGORY
Used when listening to
MODE XM Radio.
CATEGORY
+/–
G Display
The current status of
window the selected component
or a list of selectable
items appears here.
H 2CH
Press to select sound
field.
A.F.D.
MOVIE
MUSIC
C ANTENNA section
FM ANTENNA Connects to the FM
jack wire antenna (aerial)
supplied with this
receiver.
AM Connects to the AM
ANTENNA loop antenna (aerial)
jack supplied with this
receiver.
XM Connects to the XM
ANTENNA connect-and-Play
jack antenna (aerial) (not
supplied).
D COMPONENT VIDEO INPUT/
OUTPUT section
COMPONENT Connects to a DVD
VIDEO (Y, P / player, TV, or a
B
C , P /C ) satellite tuner.
B R R
INPUT/
OUTPUT
jacks*
E RS-232C jack
Used for
maintenance and
service.
This section is extracted from
instruction manual.
Name Function
I POWER
Press POWER (ZONE)
to enable operations in
SELECT
zone 2. Then press
SELECT, then INPUT
SELECTOR to
(qh)
select a source input
into zone 2.
J MULTI CH IN
Press to select the audio
input signal from the
component connected
to the MULTI
CHANNEL INPUT
jack.
K HDMI
Press to select input
source from the
component connected
to the HDMI IN jack.
L PHONES jack
Connects to headphones.
M SPEAKERS
Press to select A, B,
(OFF/A/B/A+B)
A+B, OFF of the front
speakers.
N VIDEO 3 IN/
Connect to a portable
PORTABLE AV
audio/video component
IN jack
such as a camcorder or
video game.
O MULTI
Lights up when multi-
CHANNEL
channel audio signals
DECODING are decoded.
lamp
P INPUT
Turn to select the input
SELECTOR
source to play back.
Q MASTER
Turn to adjust the
VOLUME volume level of all
speakers at the same
time.
F Control jack for Sony equipment
and other external components
CTRL S IN/ Connects to Sony
OUT jacks TV, DVD player or
VCR with
CONTROL S jack.
TRIGGER Connects to interlock
OUT jack on/off of the power
supply of other 12V
TRIGGER
compliant
components.
IR REMOTE Connects an IR
IN/OUT jacks repeater.
G VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/ Connects to a VCR
L
OUT jacks or a DVD player etc.
R
VIDEO IN/
OUT jacks*
S VIDEO IN/
OUT jacks*
H SPEAKERS section
Connects to speakers.
* You can watch the selected input image when you
connect the MONITOR OUT jack to a TV.
You can also display certain menu settings and the
sound field on the monitor when you press ON
SCREEN on the remote.