Sony STR-DA3200ES Service Manual page 28

STR-DA3200ES/DG1000
OSD ADJUSTMENT
Connection
VIDEO board
TP6501 pin 2
1. Connect a frequency counter to the TP6501 pin 2 on the VIDEO
board.
2. Press the [POWER] button to turn on the main power.
3. Perform the MEMORY CREARING MODE.
4. Press the [MENU] button on the remote commander to display
"Lebel Setting".
5. Press the button on the remote commander to display
V v
"Video Settings" and press the
commander.
6. Press the button on the remote commander to display
V v
"COLOR SYSTEM" and press the
commander.
7. Press the button on the remote commander to select
V v
NTSC.
8. Adjust the CT6501 (DA3200ES; US, Canadian, Taiwan/
DG1000) or CT6502 (DA3200ES; AEP, UK) so that the
frequency counter reading is 3.579545 MHz.
9. Press the button on the remote commander to select
V v
PAL.
10. Adjust the CT6503 so that the frequency counter reading is
4.433618 MHz.
Note: The Steps 9 and 10 should be performed to AEP and UK models of
DA3200ES.
Adjustment and Connection Location:
– VIDEO Board (Component Side) –
TP6501
CT6502 CT6501
1
CT6503
28
frequency counter
+
–
button on the remote
button on the remote
4