Installation; Hardware Installation - Macsense ifunstick User Manual

INSTALLATION

Hardware Installation

The iFunStick computer game controller uses USB technology
to interface with your computer. USB is a "hot-swappable" tech-
nology, meaning you can connect peripherals to the computer
while the power is on. However, to protect the sensitive electrical
components inside your computer (and inside the iFunStick), we
recommend turning your computer 's power off before con-
necting the iFunStick. After turning off your computer, please fol-
low these steps:
1. Plug the iFunStick's USB connector firmly into an available
USB port of your computer.
(NOTE: On most Apple computers, the USB ports can usually be
2. After plugging the iFunStick's connector into your comput-
er's USB ports (or into a hub), turn your computer's power
on and proceed to the next section in this manual:
"Software Installation."
4
found on the keyboard or in the back panel of the com -
puter. If all of your computer 's ports are occupied, you
may need to plug the iFunStick's USB connector— and
any other USB devices currently connected to your com -
puter—into a USB hub. Then connect this hub to one of
the newly vacated computer ports).