At Macsense we are continually searching for ways to improve our products and our company. If you have any suggestions, or if you have questions about the FunPad pro, please e-mail our tech- nical support department at support@macsensetech.com. The information in this manual is organized as follows:...
General Informations for FunPad pro Package Contents After opening the box containing the FunPad pro, check to make sure you have received these items. • A FunPad pro game controller • A CD containing software & on line manual System Requirements •...
FunPad pro’s Throttle Buttons, you’ll agree with us that the FunPad pro blows the competition away! Following is a list of action inputs on the FunPad pro along with a brief descrip- tion of how each one is applied.
FunPad pro. After turning off your computer, please follow these steps: 1. Plug the FunPad pro’s USB connector firmly into an avail- able USB port of your computer. (NOTE: On most Apple computers, the USB ports can be found on the keyboard or in the back panel of the computer.
Software Installation An installation CD comes bundled with the FunPad pro. This CD contains the FunPad pro’s driver (a driver is a software pro- gram that gives your computer special instructions that make the device work). After you have connected the FunPad pro’s USB cable to your computer, please locate this CD and follow the directions below.
Programming the FunPad pro With the FunPad pro cable attached to your computer and the software installed you are almost ready to start playing games. Before you do, you must program the buttons and switches on the FunPad pro because these buttons are initially set to default val- ues that may not be optimal for the game you want to play.
Choosing a Game Set Choosing a game set is a quick and easy method of program- ming your FunPad pro’s buttons so that these buttons best corre- spond to the actions and movements required for the game you want to play. To choose a game set from the list of those that have been pre-programmed, follow the instructions below: 1.
You may want to play a game for which we have not included a pre-programmed game set. To Play this game you may need to manually alter some of the functions of the FunPad pro’s buttons. In the example that follows, we’ll show you how to edit a game set.
Page 12
(NOTE: If you don’t know what keystroke represents the specific action you desire, consult the manual of the game you will be playing. Also note that it is possible for multiple FunPad pro buttons to represent the same keyboard “key - stroke.”). Figure 5 - Editing Button Action 6.
Using Game Sprockets to Configure the FunPad Pro Instead of to using the FunPad pro configuration options that are included with the software, you can use Game Sprockets to configure the buttons, switches, and directional movements of your FunPad pro.
Spections Control pad 1 all-directional control pad Control Button 8 programmable buttons Control Sticks 1 all-directional MiniStick, 1 Throttle/Rudder Stick Connector USB Type B Cable Length 140 cm 1.4 m EMI/RFI CE Approved FCC Class B Weight 190 grams (N.W.) 6.70 oz (N.W.) Temperature Operating...