INTRODUCTION Thank you for purchasing the Macsense iFunStick. The iFunStick computer game controller is equipped with a USB con- nector, making it compatible with the new Apple iMac, Blue G3, or any Macintosh with USB interface. This advanced game controller...
Genera Information for iFunStick Package Contents After opening the box containing the iFunStick, check to make sure you have received these items. • An iFunStick game controller • A CD containing software & manual System Requirements • Macintosh computer with an available USB port •...
Throttle Switch and view-altering Hat Switch, you’ll agree with us that the iFunStick blows the competition away! The following is a list of action inputs on the iFunStick, along with a brief description of how each one is applied.
Page 7
• Control Stick Faders You can make minute adjustments to the X or Y axes using the faders located on the top of the iFunStick (on top, next to the Stick).
(and inside the iFunStick), we recommend turning your computer ’s power off before con- necting the iFunStick. After turning off your computer, please fol- low these steps: 1. Plug the iFunStick’s USB connector firmly into an available USB port of your computer.
After you have connected the FunStick’s USB cable to your computer, please locate this CD and follow the directions below. 1. Insert the iFunStick CD into your computer’s CD-ROM drive and wait several moments for your computer to read the disc.
Programming the iFunStick With the iFunStick cable attached to your computer and the software installed, you are almost ready to start playing games. Before you do, you must program the buttons and switches on the iFunStick because these buttons are configured to a default posi- tion upon first installing the device, and the default position may not be appropriate for the game you want to play.
Choosing a Game Set Choosing a game set is a quick and easy method of program- ming your iFunStick’s buttons so that these buttons best corre- spond to the actions and movements required for the game you want to play. To choose a game set from the list of those that have been pre-programmed, follow the instructions below: 1.
In the example that follows, we’ll show you how to edit a game set. 1. Select Macsense GameDevices in the control panel. The iFunPad setup menu (shown previous page) appears.
Page 13
NOTE: If you don’t know what keystroke represents the specific action you desire, consult the manual of the game you will be playing. Also note that it is possible for multiple iFunStick buttons to represent the same keyboard “keystroke.”. Figure 5 - Editing Button Action 6.
Using Game Sprockets to Configure the iFunStick Instead of to using the iFunStick configuration options that are included with the software, you can use Game Sprockets to con- figure the buttons, switches, and directional movements of your iFunStick.
Calibrating the iFunStick Calibrating the iFunStick is a way of optimizing game play by fine-tuning the stick movement along the X and Y axes. There are two ways to calibrate the movement: 1. Use the X and Y Control Stick Faders to make minute adjustments to the X or Y axes located on the top of the iFunStick (on top, next to the Stick).
Specifications Control Sticks 1 all-directional hand-grip sticks Control Button 6 programmable buttons (includes Hat Switch & Throttle Wheel) Function Button/Throttle Connector USB Type B Cable Length 180 cm 1.8 m EMI/RFI CE Approved FCC Class B Weight 513.2 grams (N.W.) 1.13 lbs (N.W.) Temperature Operating...