Programming The Ifunstick - Macsense ifunstick User Manual

Programming the iFunStick

With the iFunStick cable attached to your computer and the
software installed, you are almost ready to start playing games.
Before you do, you must program the buttons and switches on the
iFunStick because these buttons are configured to a default posi-
tion upon first installing the device, and the default position may
not be appropriate for the game you want to play.
You can program the function buttons by selecting or choosing
an appropriate game set. (A game set is a group of prearranged
actions assigned to the buttons and switches of your iFunStick.
For example, a game set for a boxing game could have function
button 2 correspond to "punch," while a different game set
designed for a flight simulation game could have that same button
correspond to a "shoot" action). You can configure your
iFunStick's buttons in one of these four ways:
• Choose an existing game set that have been pre-pro-
grammed.
• Edit the existing game set and save as a new game set.
• Create an all-new game set.
• Use "Game Sprockets."
(NOTE: Game Sprockets is an interface application that lets a
6
game-oriented input device—such as the iFunStick—
communicate with your computer. Game Sprockets pro -
vides a user-friendly method of configuring your joystick,
and is supported by many games. Consult the manual of
the game you will be playing to find out if this game sup -
ports Game Sprockets).