Table of Contents
Advertisement
NETWORK CONFIGURATION
Note: This configuration process is limited to Microsoft PC's. Sorry, no Mac's.
To use your computer to program your FREEDOM SD2 Card simply format the SD card to
FAT32 and:
1. Select "START", "ALL PROGRAMS", "ACCESSORIES" and "Note Pad"
on your computer.
2. Enter the Network Configuration number from the selection below starting
at the first position of the file. Just the Network Configuration number is
all that you need.
3. Name this file "NomadSD.dat" and save it onto your SD Card in the Root
Directory. Once it is used, be sure to place it into the "MotoSAT
Configuration File" or appropriate folder.
002
The information below is used for obtaining the Network Configuration Number for proper
configuring of the NomadSD. The numbers in the first column determine the Network being
used. Always include leading zeros.
CONFIGURATION
000 DISH NETWORK MODE, NON SKEWABLE,
002 DIRECTV MODE, NON SKEWABLE,
004 BELL EXPRESSVU MODE, NON SKEWABLE
006 DIRECTV ENHANCED MODE, NON SKEWABLE,
014 DISH NETWORK EAST MODE, NON SKEWABLE
016 DISH NETWORK WEST MODE, NON SKEWABLE
018 DISH NETWORK MODE, NON SKEWABLE
128 TEST DISH (Checks movement of the mount in AZ/EL
TO PERFORM A TEST DISH
Configuration code is "128" (see above). After you perform a TEST DISH be
sure to return the configuration (NomadSD2.dat) back to the original
configuration.
PROGRAMMING
This sample configuration is set for
002 DIRECTV NON SKEWABLE 101
SATELLITES
119/110
101
92/81
101/119
119/110/61.5
110/110/148
119/110/129
10
Advertisement
Table of Contents
