Sharper Image GT800 Instructions Manual page 7

Bedside cd/am/fm stereo & dual alarm clocks with remote control and powered subwoofer
Table of Contents

Advertisement

1. To open the CD lid and access the control buttons, press the OPEN
on the top of the main unit. The CD lid automatically powers open.
2. To enter the clock setting mode, press the CLOCK SET button. The hour flashes.
3. To set the hour, press the TUNE UP or TUNE DOWN button to increase or
decrease the hour.
4. To confirm the hour setting, press the CLOCK SET button. The minutes flash.
5. To set the minutes, press the TUNE UP or TUNE DOWN button to increase or
decrease the minutes.
6. To confirm the minute setting, press the CLOCK SET button. The day of the
week flashes along the top of the LCD.
7. To set the day of the week, press the TUNE UP or TUNE DOWN button to
move forward or back through the days of the week.
8. To confirm all settings and return to normal timekeeping mode, press the
CLOCK SET button.
9. To close the CD lid, press the CLOSE button.
Note: Do not push or forcibly close the CD lid on the main unit by hand. Press
the CLOSE button.
1. To open the CD lid, press the OPEN
The CD lid automatically powers open.
2. Insert a CD into the CD tray.
3. To close the CD lid, press the CLOSE button on the control panel. The CD
lid automatically powers closed.
4. To turn the unit on in the CD mode, press the POWER/FUNCTION button
until a
appears on the LCD.
5. To start playback at the beginning of the CD, press the PLAY/PAUSE/STOP
#/
"
button on the main unit.
$
6. To select a specific track during playback, press SKIP + or - until the desired
track number appears. In stop mode, press the PLAY/PAUSE/STOP
after you select a track.
7. To fast forward or rewind within a track during playback, press and hold the
SKIP + or - button.
Quick Start
Clock Setting
CD Playback
button on the top of the main unit.
button
"
#/
button
$

Advertisement

Table of Contents
loading

Table of Contents