JVC HR-XVC20U User Manual page 31

Auto Rewind feature
This VCR will automatically rewind the
tape when the tape has ended (except
during ITR and TIMER REC). It will also
eject the tape.
Recording a TV program
To stop recording
Press STOP to stop recording.
" " will appear on screen for about 4
seconds.
To stop recording temporarily
Press PAUSE to avoid recording unwanted
material. Press again to continue the
recording.
" " will appear on screen for about 4
seconds.
NOTES:
•
The pause function will be released after 5 minutes to prevent damage
to the tape or the VCR. The VCR will change to the STOP mode.
•
You can select a recording channel in the recording pause mode.
Recording one program while watching another
While the VCR is recording, press TV/VCR to select the TV position.
The "VCR" will go off and recording will continue.
Select the TV channel you want to watch by using the TV channel
selector. If the connected TV is JVC's, use TV CH +/– after slide TV/
VCR/DVD switch to TV.
NOTE:
Some CATV hookups do not permit viewing one channel while
recording another. See pages 16,17.
To Display VCR operation Status
Press OSD. The clock, day of the week and more information will be
indicated.
While watching TV
CLOCK
STEREO AND
SEPARATE AUDIO
PROGRAM (SAP)
While operating a tape
HI-FI STEREO
OUTPUT SELECTION
To cancel the display: Press OSD until all indicators disappear.
DAY OF THE WEEK
8 : 47 MON CH 125
AM
STEREO SAP
00 : 00 : 00 SP
REAL TIME COUNTER
8 : 30 MON
AM
HI - FI
STEREO 00 : 00 : 00 SP
CHANNEL
TAPE SPEED
OPERATING
MODE
AUTO REPEAT
TAPE IN
31