JVC HR-XVC20U User Manual page 19

Dvd/cd player hi-fi stereo video cassette recorder
Hide thumbs Also See for HR-XVC20U:
Table of Contents

Advertisement

Connect to a Stereo Amplifier with Audio Output
DVD/VCR
Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
such as Dolby Digital and DTS by using the Optical or Coaxial Digital Output.
Use this connection to connect an:
• AV amplifier with built-in *Dolby Digital decoder
• AV amplifier with built-in *DTS decoder
Coaxial Digital Audio Output
DVD/VCR
Connecting the optical digital cable
You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital
cable.
When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.
When not using the optical digital cable, attach the dust protection cap to protect against dust.
NOTES:
The OPTICAL, COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT jacks are useful only for DVD section. The
VHS signal is output only from the composite jack(DVD/VCR VIDEO OUTPUT) and UHF/VHF OUT.
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the
speakers to be damaged.
Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input
connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may
cause such a high level of noise that it may be harmful to your ears and damage your speakers.
DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is
necessary.
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
AUDIO/VIDEO cable (supplied)
To Audio/Video Output
Stereo Amplifier
Y
P
/C
B
B
P
/C
R
R
Audio (L) Output
Audio (R) Output
AUDIO cable (not supplied)
Video Output
Y
P
/C
B
B
P
R
/C
R
Coaxial digital cable
(not supplied)
Playback connections
To Audio/Video Input
To Audio (L) Input
To Audio (R) Input
Video cable (not supplied)
AV Amplifier with
built-in various
decoder as above
TV
To Video
Input
TV
NOTE:
You may connect to a TV with a
Component video cable (not supplied)
or S-Video cable (not supplied) instead
of a video cable (not supplied).
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-xvc20usHr-xvc20usr

Table of Contents