Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
SERVICE MANUAL
DVD/CD PLAYER Hi-Fi STEREO VIDEO CASSTTE RECORDER
Regarding service information other than these sections, refer to the service manual No. 82948 (HR-XVC20US).
Also, be sure to note important safety precautions provided in the service manual.
SPECIFICATIONS
GENERAL
Power supply:
AC 120V 60Hz
Power consumption:
Operation: 18W
Stand by: 2W
Weight:
7.9lbs (3.6 kg)
Dimensions:
Width : 16-15/16 inches (430 mm)
Height : 3-7/8 inches (99 mm)
Depth : 9-13/16 inches (249 mm)
Inputs/Outputs:
Video:
In: 1Vp-p/75 ohm
Out: 1Vp-p/75 ohm
Audio:
In: - 8 dBm/50k ohm
Out: - 8 dBm/1k ohm
Antenna:
UHF/VHF IN/OUT: 75 ohm coaxial
Hi-Fi Frequency Response:
20Hz to 20,000Hz
Hi-Fi Dynamic Range:
More than 90dB
VCR section
Video Head:
4 Rotary Heads
Audio Track:
Hi-Fi Sound - 2 Tracks / MONO Sound - 1 Track
Tuner:
181 Channel Freq. Synthesized
VHF
UHF
CATV
RF Channel Output:
Channel 3 or 4, Switchable
F.FWD/REW Time:
Approx. 1 minute 48 seconds (with T-120 Cassette Tape) (at+25°C)
HR-XVC20U
2-13
14-69
14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD
(R)
S
DVD section
Signal system:
NTSC
Applicable disc:
DVD (12cm, 8cm), CD (12cm, 8cm)
Audio characteristics
Frequency response:
DVD: 4Hz - 22kHz
CD: 4Hz - 20kHz
S/N Ratio:
90dB
Harmonic distortion
0.02%
Wow and flutter:
Less than 0.01% Wrms
Dynamic range:
More than 90dB
Output:
Video :
Audio :
Digital Audio : 0.5Vp-p 75 ohm
Pickup:
CD :
DVD : Wavelength: 640 - 660 nm
ACCESSORIES:
Remote control x 1
Batteries (2 x AA)
75 ohm Coaxial Cable x 1
AUDIO/VIDEO Cable x 1
(RCA) 1 Vp-p/75ohm
(RCA) - 8 dBm/1k ohm
Wavelength: 775 - 805 nm
Maximum output power: 0.5 mW
Maximum output power: 1.0 mW
HR-XVC20US(R) D2VP11
No.82989
2003/07
Advertisement
Table of Contents
Related Manuals for JVC HR-XVC20US(R)
Summary of Contents for JVC HR-XVC20US(R)
- Page 1 SERVICE MANUAL DVD/CD PLAYER Hi-Fi STEREO VIDEO CASSTTE RECORDER HR-XVC20U Regarding service information other than these sections, refer to the service manual No. 82948 (HR-XVC20US). Also, be sure to note important safety precautions provided in the service manual. SPECIFICATIONS GENERAL DVD section Power supply: AC 120V 60Hz...
-
Page 2: Table Of Contents
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. E68219 CAT. M2C58 DISTRIBUTOR / DISTRIBUTEUR DISTRIBUTED BY JVC AMERICAS CORP., 1700 VALLEY ROAD, WAYNE, N.J. 07470 AUDIO DISTRIBUTED BY JVC CANADA, INC. 21 FINCHDENE SQUARE, SCARBOROUGH, ONTARIO.MIX 1A7. DISTRIBUT PAR JVC CANADA, INC. 21 FINCHDENE SQUARE, SCARBOROUGH, ONTARIO.MIX 1A7. -
Page 3: Disassembly Instructions
DISASSEMBLY INSTRUCTIONS REMOVAL OF MECHANICAL PARTS 1-3: DVD DECK (Refer to Fig. 1-3) AND P.C. BOARDS Make the short circuit on the position as shown Fig. 1-3 using a soldering. If you remove the DVD Deck with no 1-1: TOP CABINET AND FRONT CABINET soldering, the Laser may be damaged. -
Page 4: Dvd Pcb
DISASSEMBLY INSTRUCTIONS 1-4: DVD PCB (Refer to Fig. 1-4) 1-6: VCR PCB (Refer to Fig. 1-6) Remove the 3 screws 1. Remove the screw 1. Remove the 4 screws 2. Remove the screw 2. Remove the screw 3. Disconnect the following connectors: (CP4002 and CP8102). -
Page 5: Removal Of Dvd Deck Parts
DISASSEMBLY INSTRUCTIONS 4. REMOVAL OF DVD DECK PARTS Main Chassis Ass’y NOTE 1. Do not disassemble the DVD DECK PARTS except listed Rack Loading parts here. Minute adjustments are needed if the disas- semble is done. If the repair is needed except listed parts, replace the DVD MECHA ASS’Y. -
Page 6: Main Chassis Ass'y
DISASSEMBLY INSTRUCTIONS NOTE Main Chassis Ass’y When installing the Clamper Magnet, install it with the green face up. When installing the wire of the Lever Switch, install it correctly as Fig. 4-4-B. When installing the Lever Switch, install it correctly as Traverse Holder Fig. -
Page 7: Relay Pcb Ass'y
DISASSEMBLY INSTRUCTIONS NOTE 4-9: GEAR (Refer to Fig. 4-9-A) Unlock the support 1. After the assembly of the Rack Feed, check if the Rack Feed 1/2 is moving smoothly. (Refer to Fig. 4-7-B) Remove the Middle Gear 1/2/3, Idler Gear and Feed Gear. In case of the Rack Feed Ass’y installation, install cor- rectly as Fig. -
Page 8: Feed Motor
DISASSEMBLY INSTRUCTIONS NOTE In case of the Idler Arm installation, install as the circled section of Fig. 4-10-B. In case of the Idler Arm Spring installation, install as the circled section of Fig. 4-10-C. In case of the Chassis Spring installation, install as the circled section of Fig. -
Page 9: Electrical Adjustment Parts Location Guide
ELECTRICAL ADJUSTMENTS ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (Connector Connections) AC IN CD501 VCR PCB TP8001 TP3001 CP102 J8001 CD8002 CP8102 CP8002 CP103 FE HEAD AC HEAD CP2601 TP101 CP2603 TP3002 CP501 CP4002 CP2602 DVD PCB CP651 V651 CD2001 DVD DECK CD681 CP681 OPERATION PCB... -
Page 10: When Replacing Eeprom(Memory) Ic
WHEN REPLACING EEPROM (MEMORY) IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. NOTE: No need setting for after INI 2F. ADDRESS DATA INIT 00 0E PLAY/REC... - Page 11 JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. www.jvcservice.com(US Only) JVC CANADA INC. Head office : 21 Finchdene Square Scarborough, Ontario M1X 1A7 (416)293-1311 Printed in Japan 0307 VP...
- Page 12 SCHEMATIC DIAGRAMS DVD/CD PLAYER Hi-Fi STEREO VIDEO CASSTTE RECORDER HR-XVC20U CD-ROM No.SML200308 Regarding service information other than these sections, refer to the service manual No. 82948 (HR-XVC20US). Also, be sure to note important safety precautions provided in the service manual. SPECIFICATIONS GENERAL DVD section...
-
Page 13: Charts And Diagrams
SECTIO CHARTS AND INTERCO OPERATION PCB PCB270 VEBA07 CP2601 GND(PDIC) GND(PDIC) Vref Vref CP501 CP4002 P.CON+3.3V P.CON+3.3V DRIVE P.CON+3.3V P.CON+3.3V DM-2 P.CON+5V P.CON+5V P.CON+9V A P.CON+9V A P.CON+9V A P.CON+9V A MON(COM) MON(COM) MOTOR GND GND(CD) GND(CD) P.CON+12V P.CON+12V VOL(CD) VOL(CD) AT+5V AT+5V... -
Page 14: Interconnection Diagram
TION 2 ND DIAGRAMS CONNECTION DIAGRAM FULL ERASE HEAD ASS’Y HALL MAIN ROTOR SENSOR COIL MAGNET FG SENSOR HALL HALL SWITCH LOGIC CP3001 CAP FG CAP VCO CAP.M/F/R I LIMIT MOTOR GND LD/CY VCO CAP CTL CAPSTAN DD UNIT LDM CTL M2001 CYL FG/PG CYL CTL... - Page 15 Y/C/AUDIO/CCD/HEAD AM (VCR P R129 1.8K FROM POWER P.CON+5V FROM/TO HI-FI/DEMODULATOR TO_NORMAL_A FROM_NORMAL_A HF_COM C166 COMP AUDIO C-ROT C-GND C-VCC A.VCC SERAIL KILL MUTE RF-SW 320FH VX01 HA SW 0.068 B DECODER C169 CHROMA 0.047 F C165 BEFORE 0.047 F FROM/TO CYL AFTER CP101...
- Page 16 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. AMP SCHEMATIC DIAGRAM CR PCB) BUFFER Q109 KTC3875S_Y_RTK R129 FROM/TO TUNER/JACK DVD_V_OUT[DAC_D] C142 FRONT_V_IN...
- Page 17 SYSCON SCHE (VCR P C3025 FROM/TO POWER 12P CH X3001 10MHz 10MHz DVD_POWER_CTL R3034 AT+12.6_V P.CON+5V AT+5V[M-CON] VCR_POWER_ON-L R3057 CAP_LIMIT POWER_FAIL 5.1 3.4 2.5 0 5.1 1.4 1.5 AT+5.2V MOTOR_GND TV/VCR POWER_MUTE-L SYS_MUTE SYS MUTE C3033_1 FL CLK/VSC CLK FL DATA/VSC DATA VCR_H FROM/TO DECK AV SW2...
- Page 18 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. HEMATIC DIAGRAM CR PCB) TP3002 H.SW FROM/TO Y/C/AUDIO/CCD/HEAD AMP DUMMY_V.SYNC RX DRIVE C.SYNC Q3003 V.REC_ST-H...
- Page 19 TUNER/JACK SCH (VCR P RF MUTE SW Q301 KTC3875S_Y_RTK REAR OUT JACK J8001 MSP-213V1-432_PBSN C315 R304 C318 RF_CONV_A_OUT A.IN RF_CH_SW L301 P.CON+5V 22uH 0305 TV/VCR CONTROL VIDEO OUT TP8001 R302 V.IN D8003 MTZJ6.8B C8014 CLOCK DATA C8013 R8014 R8032 AFT-S.CURVE R8015 A.OUT R8009...
-
Page 20: Schematic Diagram
The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. SCHEMATIC DIAGRAM CR PCB) FROM AUDIO/VIDEO (CP8102) CP8002 IMSA-9604S-08C DVD_RESET DVD_RESET SYS_MUTE SYS_MUTE CD8002... - Page 21 OPERATION/DISPLAY S (VCR PC V651 ELF-4M6SDRVGWB SEG1 SW Q664 KRC103SRTK R674 1G SW Q665 KTA1504S_Y_RTK SEG2 SW Q663 KRC103SRTK R673 SEG3 SW Q662 KRC103SRTK R672 2G SW Q661 KTA1504S_Y_RTK SEG4 SW Q660 KRC103SRTK R670 SEG5 SW Q658 KRC103SRTK R668 3G SW Q659 KTA1504S_Y_RTK SEG6 SW...
- Page 22 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. Y SCHEMATIC DIAGRAM R PCB) DRVGWB FROM/TO SYSCON DVD_LED VCR_LED 1G/VCR/T-REC_LED 2G/DUB/REC_LED 3G/TV/VCR_LED 4G/VSC_LED...
- Page 23 HI-FI/DEMODULATOR (VCR PC C744 0.1 F C743 R716 3.3K 0.22 HI-FI/AUDIO/HEAD AMP/DEM IC R717 IC701 AN3663FBP 2.2M C746 DEM_BLK LOGIC C747 C751 4.5M 95HMz MUTE VCO- TRAP DEMOD L702_1 LOGI P.CON+5V 3.5M COMP 22uH 0305 C748 C749 MAIN LOGIC SW21 DEEN DEMOD 0.1 F...
- Page 24 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. OR SCHEMATIC DIAGRAM R PCB) FROM/TO TUNER/JACK FRONT_A_IN_R FRONT_A_IN_L SIF_OUT DVD_A_OUT_L DVD_A_OUT_R AUDIO_OUT HIFI_A_OUT_R...
- Page 25 POWER SCHEMA (VCR PCB) D506 C516 1N4005-EIC 250V 0.0047 D503 D507 1N4005-EIC 0R4A223F20 RGP15J L501 C531 L502 500V 560P W849 W5T_20*10*10A W831 AC120V_60HZ B502 CD501 09419910 2.5A 125V D502 W5RH3.5X5X1.0 WHITE 1N4005-EIC WHITE S502 F501 51MS025L D505 BLACK S501 1N4005-EIC BLACK FH501 FH502...
- Page 26 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. EMATIC DIAGRAM PCB) W870 TO Y/C/AUDIO/CCD/HEAD AMP P.CON+5V W806 AT+12.6_V P.CON+12V SW Q510 KTC3203_Y FROM/TO SYSCON...
- Page 27 OPERATION/LED SC (OPERA R685 R686 R687 R688 13K 1/4W 6.8K 1/4W 3.9K 1/4W 2.7K 1/4W NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. 2-15...
- Page 28 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. D SCHEMATIC DIAGRAM ERATION PCB) DVD LED D685 R688 R689 2.7K 1/4W 3.3K 1/4W LTL-1CHGT-002A...
- Page 29 SW/RELAY/FG SC M2002 M2001 BCD3B02 JCL9B61 IMSA-9615S-08C-PP SLD.MTR(-) SLD.MTR(+) SP.MTR(-) SP.MTR(+) S1005X S1005Y S1005 L.SW S1004X S1004Y S1004 S1001X S1001Y S1001 S1003X S1003Y S1003 PCB68A S1002X S1002Y S1002 VEBA12 2-17...
- Page 30 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. SCHEMATIC DIAGRAM PCB640 VEBA17 SW1AB-271-10A PCB690 SG-107F6 VEBA13 2-18...
- Page 31 MPEG/MICON SCH (DVD PC C4038 0.01 B C4088 0.01 B DUPTD1 C4089 DUPRD1 0.01 B DUPTD0 C4090 W832 DUPRD0 W833 0.01 B P.CON+5V FROM/TO MEMORY D_GND P.CON+3.3V SSCRXD MEMCS(1) C4008 0.1 F VDDP HA15 MEMAD(15) HA16 MEMAD(16) HA14 MEMAD(14) HA13 MEMAD(13) HA12 MEMAD(12)
- Page 32 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. CHEMATIC DIAGRAM D PCB) FROM/TO AUDIO/VIDEO DAC_VIDEO_C DAC_VIDEO_B DAC_VIDEO_D DAC_VIDEO_A R4002 75 +-1% ASDATA0 R4003...
- Page 33 MEMORY SCHEM (DVD PC FROM/TO MPEG/MICON FLASH IC IC4007 SST39VF800A-70-4C-EK SD_A0 SD_A1 HA16 SD_A2 SD_A3 C4064 SD_A4 VCCQ SD_A5 0.1 F SD_A6 SD_A7 SD_A8 SD_A9 SD_A10 HD15 DQ15 SD_A11 SD_D0 SD_D1 SD_D2 SD_D3 SD_D4 HD14 DQ14 SD_D5 SD_D6 SD_D7 SD_D8 SD_D9 SD_D10 HD13...
- Page 34 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. HEMATIC DIAGRAM D PCB) HA15 HA14 64M SDRAM IC IC4005 M12L64164A-7T HA13 C4044 HA12...
- Page 35 RF AMP/DSP SCHEM (DVD PC FROM/TO LODER R2620 VR DVD CTL CP2601 Q2603 4.7K 09-5000-024-001 R2647 2SK3018 VR CD CTL Q2604 TP12 TP11 4.7K R2623 2SK3018 VR SEL CTL Q2605 4.7K 2SK3018 DVDPD MON(DVD) C2635 OPU_RF TP10 VR_DVD 0.001 B VOL(DVD) GND(DVD) DVDLD...
- Page 36 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. HEMATIC DIAGRAM D PCB) FROM/TO MPEG/MICON SPDL_SENS TOUT_SW R2625 4.7K MOT_SPDL+ TIN_SW RFA_SDEN R2627...
-
Page 37: Audio/Video Schematic Diaram
AUDIO/VIDEO SCHEMATIC DIAGRAM (DVD PCB) FROM/TO MPEG/MICON P.CON+A5V P.CON+A5V DAC_VIDEO_A DAC_VIDEO_A DAC_VIDEO_C DAC_VIDEO_B DAC_VIDEO_D P.CON+5V P.CON+3.3V R8134 DVD_AUDIO_L R8135 DAC_VIDEO_C DVD_AUDIO_R OPTICAL B8103 OS8101 OFTG038101 FCM2012H-102T04 AT+5V SPDIF INPUT DVD AUDIO OUT B8102 P.CON+12V J8101 DAC_VIDEO_B V_SW FCM2012H-102T04 MSP-213V1-732_PB RESET B8101 FCM2012H-102T04 D AUDIO DRIVER... - Page 38 The Parts Number , value and rated voltage etc. in the Schematic Diagram are for references only. Note : When replacing the parts , refer to the Parts List. C8146 C8144 6.3V C8145 6.3V 6.3V W865 DAC_D_DVD_VIDEO C8134 12P CH L8101 0305 C8135...
-
Page 39: Printed Circuit Board Vcr
PRINTED CIRCUIT BOARDS VCR (INSERTED PARTS) SOLDER SIDE J8005 J8003 J8004 SW651 C8019 W189 SW655 SW654 SW653 W101 C652 R651 W839 D8002 W185 W100 W840 C3023 W181 W094 W093 W092 W091 R3019 W023 W089 R3011 W838 W837 W114 C3021 W112 W256 W111 C8032... - Page 40 COMPONENT PARTS LOCA CAUTION : FOR CONTINUED PROTECTION AGAINST FIRE HAZARD , REPLACE ONLY WITH SAME TYPE AND RATED FUSE ( S ) . REF.NO. LOCATION REF.NO. LOCATION ATTENTION : CAPACITOR C727 REPLACER PAR DES FUSIBLE DE MEME TYPE. C101_1 C728 C103 C729...
- Page 41 ATION GUIDE <VCR> VMC300A REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION RE D532 R113 R3008 D534 R114 R3009 D535 R115 R3010 D536 R116 R3011 D537 R117 R3012 D538 R119 R3014 D539 R120 R3015 D651 R121 R3016 D656 R122 R3017 D701 R123 R3019 D702 R124...
-
Page 42: Printed Circuit Board Dvd
PRINTED CIRCUIT BOARDS CR (CHIP MOUNTED PARTS) SOLDER SIDE SOLDER SIDE DANGEROUS VOLTAGE 2-30... - Page 43 PRINTED CI DVD (T IC4005 L8106 L8105 R8111 D8108 D8106 D8107 D8112 D8111 D8110 C8132 C8131 C8130 R8121 W831 Q8102 C8133 Q8103 R4005 R4004 C4007 R4003 R4002 C4006 C4004 D8109 D8113 Q8107 R8131 B8101 R8132 D8102 CP8102 Q8101 D8101 Q8106 COMPONENT PARTS LOCATION GUIDE <DVD>...
- Page 44 CIRCUIT BOARDS D (TOP SIDE) W811 CP2602 CP2603 CP2601 D2601 C2633 C2625 C2628 C2624 C2635 C2629 R2614 C2603 Q2602 Q2601 C2604 C2605 C2606 C2616 C2607 IC2601 R2643 C2618 R2644 C2649 R2604 C2654 R2603 C2617 R2635 W861 W837 R4041 W836 C2621 C4062 W829 W828...
- Page 45 PRINTED CIRCUIT BOARDS DVD (BOTTOM SIDE) D8103 Q8104 Q8105 W869 W874 W872 B7302 2-33...
-
Page 46: Printed Circuit Board Operation
PRINTED CIRCUIT BOARDS OPERATION SOLDER SIDE SW690 SW686 R690 R685 R686 SW689 SW685 R688 R687 SW687 SW688 R689 CP681 R2651 (VP)-D2VP11 HR-XVC20US(R) 2-34... - Page 47 JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. www.jvcservice.com(US Only) JVC CANADA INC. Head office : 21 Finchdene Square Scarborough, Ontario M1X 1A7 (416)293-1311 Printed in Japan 0307 VP...
-
Page 48: Parts List
BEWARE OF BOGUS PARTS Parts that do not meet specifications may cause trouble in regard to safety and performance. We recommend that genuine JVC parts be used. 3.1.1 PACKING AND ACCESSORY ASSEMBLY <M1> The instruction manual to be provided with this product will differ according to the destination. -
Page 49: Final Assembly
3.1.2 FINAL ASSEMBLY <M2> PCB010 (VCR PCB ASS'Y) PCB130 (DVD PCB ASS'Y) RATING LABEL PCB270 (OPERATION PCB ASS'Y) -
Page 50: Mechanism Assembly(Dvd)
3.1.3 MECHANISM ASSEMBLY(DVD) <MN> CD2302 Do not replace the parts. Because, minute adjustments are needed if CD2001 this condition is disassembled further more. PCB640 If the repair is needed, replace the (SW PCB ASS'Y) DVD MECHA ASS'Y. M2002 PCB68A (RELAY PCB ASS'Y) CD2301 NOTE: Applying positions AA, AB and AC for the... -
Page 51: Mechanism Assembly(Vcr)
3.1.4 MECHANISM ASSEMBLY(VCR) <M4> [ TOP VIEW ] CD1501 M2003 UN4001 H5002 H5001 CD1502 M101 NOTE: Applying positions AA, AB, AC, AD and AE for CLASS PART NO. MARK the grease are displayed for this section. GREASE G-555G Check if the correct grease is applied for each MG-33 position. - Page 52 [ BOTTOM VIEW ] M2001 CD1501 CD1502 NOTE: Applying positions AA, AB, AC, AD and AE for CLASS PART NO. MARK the grease are displayed for this section. GREASE G-555G Check if the correct grease is applied for each MG-33 position.
-
Page 53: Packing And Accessory Assembly
PARTS LIST REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -... -
Page 54: Mechanism Assembly(Dvd)
REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -... - Page 55 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
- Page 56 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
- Page 57 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
- Page 58 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
-
Page 59: Operation Board Assembly<28
REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -... - Page 60 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
- Page 61 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
- Page 62 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...