Recording A Tv Program - JVC HR-XVC20U User Manual

Recording a TV program

Recording and viewing the
same TV program
NOTES:
• If the erase prevention tab is removed,
the tape will eject when both the REC
and PLAY are pressed for recording.
• If you wish to watch the DVD playback
during the normal recording on VCR,
press DVD to change to DVD mode
and perform the DVD playback (see
page 37).
30
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light.)
1
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
2
Press SP/EP to select the desired tape
speed SP or EP.
The tape counter and "SP" or "EP" will
appear on the screen for about 4
seconds.
3
Set the TV/CATV option to the appropriate position (see page
21).
4
Press Number keys or VCR CH +/– to select the channel to
be recorded.
1-9 Press 0 twice and then 1-9 as required. Example: To
select 2, Press "002".
10-12 Press 0 first and then the remaining 2 digits in order
from left to right.
Example: Press 012 for "12".
13-99 Press 2 digits in order.
Example: Press 22 for "22".
100-125 Press the 3 digits in order.
Example: Press 110 for "110".
VHF/UHF/CATV CHANNELS
TV
VHF
2-13
UHF
14-69
5
On the VCR, press REC.
Or on the Remote, while holding REC,
press PLAY.
" " will appear on the screen for
about 4 seconds and "REC" will
appear on the display.
00 : 00 : 00 SP
TV - VHF/UHF channels
CATV - CABLE TV channels
CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
INDEX
CH 110
CH 110