Internet Portal; Digital Teletext; Software Upgrade - celcus LED40189FHDCNTD Operating Instruction

To play other media types from this screen, you must
go back to main Media Browser screen and select
the media type as desired and then perform the
network selection again. Refer to the Media Browser
playback.
network through DLNA.
You can connect only one television with DLNA to
the same network. If a problem occurs with the DLNA
network, please switch your television off at the wall
socket and back on again. Trick mode and jump are
not supported with the DLNA function.
Note: There may be some PC's which may not be able
to utilize the DLNA function due to administrator and
security settings (such as business PC's).
For best home network streaming with this TV, the
supplied Nero software should be installed.

Internet Portal

Ensure the TV is connected to a Wired/Wireless
Internet connection. After the connection is
established, you can select or view portal options.
Note: A Broadband Internet connection is required
for high quality viewing. Ensure that the internet
connection is made properly. You must set the
Country and Language data correctly in the First
Time Installation for the proper operation of the
internet portal.
Press " " button on your remote control and the
portal application options will be displayed. The
application options will be displayed in a manner
similar to the template below.
Use the " " or " " , " " or " " to navigate between
the items on Portal screen. Press the OK button to
to the previous screen.
Press the EXIT button to quit the Internet portal mode.
BACK button to go
English - 17 -
Note on PIP Window
If you switch to portal mode while watching TV
channels, current programme will be displayed on
the PIP window. You can change channels using
P+/P- buttons.
Current HDMI content will be displayed on the PIP
window, if you switch to portal mode while watching
HDMI source.
Use the " " or " ", " " or " " to navigate between
the items on Portal screen. Press the OK button to
to the previous screen.
Press the EXIT button to quit the Internet portal mode.

Digital Teletext

Press the " " button. The digital teletext information
appears. Operate it with the coloured buttons, cursor
buttons and the OK button.
The operation method may differ depending on the
contents of the digital teletext. Follow the instructions
displayed on digital teletext screen.
When the " " button is pressed again, the TV returns
to television broadcast.

Software Upgrade

Your TV is capable of finding and updating
automatically via the Aerial signal or over the Internet.
Background search and upgrade mode
While the TV is connected to the Internet, if new
software is found, it downloads the upgrades
automatically when the TV next powers on from
standby.
3.00am search and upgrade mode
While the TV is connected to an aerial signal. If
Automatic scanning in the Upgrade Options menu
is enabled, the TV wakes up at 03:00 and searches
broadcast channels for new software upgrades. If
new software is found and downloaded successfully,
the next time the TV powers up , it will have the new
software version.
Note. If the TV fails to come on after the upgrade
unplug the TV for 2 minutes and plug in again.