Menu Features And Functions - celcus LED40189FHDCNTD Operating Instruction

You can change the picture mode to suit your preference or requirements. The Picture
Mode
mode can be set to one of these options: Cinema, Game, Sport, Dynamic and Natural.
Contrast Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
Power Save To set the Power Save Mode as Eco, Picture Off and Disabled. See the section, "Environmental
Mode Information" in this manual for further information on the Power Save Mode.
This setting controls the backlight level and it can be set to Auto, Maximum, Minimum
Backlight or Eco Mode. The Backlight function will be inactive if the Power Save Mode is set to
(optional) On. The Backlight cannot be activated in VGA, Media Browser mode or while the picture
mode is set to Game.
If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting
Noise
to reduce the amount of noise. Noise Reduction can be set to one of these options: Low,
Reduction
Medium, High or Off.
Dynamic You can change the contrast rate by using the dynamic contrast function. Dynamic contrast
Contrast can be set to one of these options: Low, Medium, High or Off.
Colour Temp Sets the desired colour tone.
Picture Zoom Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.
HDMI True While watching from a HDMI source, this feature will be visible in the Picture Settings
Black menu. You can use this feature to enhance the blackness in the picture.
Films are recorded at a different number of frames per second to normal television
Film Mode
scenes clearly.
Skin Tone Adjust the desired skin tone.
Colour Shift Adjust the desired colour tone.
Press OK
RGB Gain
using the RGB Gain feature.
Reset Resets the picture settings to factory default settings.
Autoposition
Automatically optimizes the display. Press OK to optimize.
(in PC mode)
H Position
This item shifts the image horizontally to the right hand side or left hand side of the screen.
(in PC mode)
V Position
This item shifts the image vertically towards the top or bottom of the screen.
(in PC mode)

Menu Features and Functions

Picture Menu Contents
Advanced Settings
English - 10 -