Electronic Programme Guide (Epg); Product Safety; Wired Connectivity - celcus LED40189FHDCNTD Operating Instruction

Electronic Programme Guide (EPG)

Some, but not all channels send information about the
current and next programmes. Press the "
button to view the EPG menu.
Up/Down/Left/Right: Navigate EPG.
OK: Displays programme options.
Displays, in detail, information on the
programme selected.
GREEN: Switches to List Schedule EPG.
YELLOW: Switches to Timeline Schedule EPG.
BLUE:
Programme Options
In the EPG menu, press the OK button to enter the
Event Options menu.
Select Channel
In the EPG menu, using this option, you can switch
to the selected channel.
Set Timer / Delete Timer
After you have selected a programme in the EPG
menu, press the OK button and the Options screen
will be displayed. Select the "Set Timer on Event"
option and press the OK button. You can set a timer
for future programmes. To cancel an already set timer,
highlight that programme and press the OK button.
Then select "Delete Timer" option. The timer will be
cancelled.

Product Safety

Do not drop objects on the product or knock the
product forcefully. This may result in an electric
Do not disassemble, repair or modify the product
or its parts. Doing so may result in damage to the
product or a malfunction.
Do not spray cleaner directly onto the surface of the
product.This may result in discoloration and cracks
and may cause the screen display to peel off.
" (EPG)
Do not let water come into contact with the product
when cleaning it. Ensure that water does not enter
the product. This may result in an electric shock
Since the surface of the product is easily scratched,
make sure you clean the product with a soft cloth. As
the product may be scratched if there is any foreign
material on the cloth, make sure to shake off any
dust before using it.
Do not scratch the surface of the display screen with
a sharp tool or clean it using chemicals. This may
degrade the screen quality.
Do not apply force to the display screen.
Do not drop or bend the product.

Wired Connectivity

To Connect to a Wired Network
For connecting to a wired LAN, you should
perform the following steps:
You must have a modem/router connected to an
active broadband connection.
Ensure that Nero Media Home software is installed
to your PC (for DLNA function). See Appendix A for
more information on the installation process.
Connect your PC to your modem/router. This can
be a wired or wireless connection.
Connect your TV to your modem/router via an
ethernet cable. There is a LAN port at the rear
(back) of your TV.
Media Browser. Press the Menu button and select
Media Browser by using the " " or " " buttons
and press OK to continue. Select the desired
Media Browser screen to access and play shared
English - 13 -