Installing Door Handles - Electrolux EI23BC60KS8A Use And Care Manual

Door Handle
Mounting Instruc-
tions
1 Remove handles from
protective packaging.
2 Position fresh food handle
end caps (A) over upper
and lower pre-installed
shoulder bolts (B) that
are fastened into door,
ensuring the holes for
the set screws are facing
towards the opposite door.
3 While holding handle firmly
against door, fasten upper
and lower Allen set screws
(C) with supplied Allen
wrench.
4 Repeat steps 2 and 3 to
install opposite handle.
Ensure the holes for the set
screws are facing towards
the first door.
5 Position freezer handle end
caps over left and right
pre-installed shoulder bolts
that are fastened to the
drawer, ensuring the holes
for the set screws are
facing down.
6 While holding handle firmly
against drawer, fasten left
and right Allen set screws
(C) with supplied Allen
wrench.
NOTE
To ensure that handles are flush with doors/drawer, make sure that set screws are
completely tightened.
CAUTION
Wear gloves and safety goggles and use extreme CAUTION when installing these
handles. The rounded end of the handles may be sharp (some models).

Installing Door Handles

End
Cap
End
Cap
Mounting Refrigerator Handles
End
Cap
Mounting Freezer Handle
End
Cap
End
Cap
End
Cap
13