Advanced Setup - IQ CCTV IQR16D User Manual

16 camera dvr with real time hd1 recording and mobile/internet access
Table of Contents

Advertisement

IQCCTV
2.7.2 Advanced
[Minor stream]: Set image quality and frame speed. When the network is not
good, the secondary stream can reduce the image quality and frame rate and
open by default.
[Email]:Support email alarm when an event is triggered, DVR system will
automatically intercept the pictures when an event is triggered and then send
it to the specified mailbox to prompt the users.
[DNS]: Set the IP of DNS server's
[Mobile]: Set the phone access port
[UPNP]: When the UPNP is on (Router must support UPNP), the DVR host will
map the port and IP automatically to the Router.
Note: If the Router doesn't support UPNP, please manually map the relevant port
from the port forwarding or virtual server. If conflicting with other ports, please
modify the port on the DVR.
[DDNS]: DDNS is a Dynamic Domain Name Server. Set DDNS type, server
address, domain name, user name and password, as shown in the picture
above .
o
DDNS Type: with options of 3322.org and dyndns
o
Domain Name: the domain name applied by the user for the DVR
o
User Name: the user name registered on the DDNS
o
Password: the password corresponding to the user name
17
IQR16D – 16 Camera DVR

Advertisement

Table of Contents
loading

Table of Contents