Table of Contents
Advertisement
Convenient functions
Basic Settings
Others
Standby Settings
Quick Start
• On:
It is possible to start quickly from standby
mode.
• Off:
Power consumption in standby mode is
minimized. (
101)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set time
comes.
• When "Home Network function" (
Recording function" (
for this function is fixed to "On".
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When "REWIND LIVE TV" is set to "On"
(
76), "Off" cannot be selected.
84
SQT0137
83) or "Remote
82) is set to "On", the setting
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (
media other than HDD with DIRECT
NAVIGATOR, Copying titles with copying
list).
RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When "Quick Start" is not activated).
• If "On" is selected, the aerial signal is output
from this unit.
Power Save for Network Standby
You can minimize power consumption in
standby mode even when the "Quick Start"
function is activated. (
• When this is set to "On", startup time when operating
[GUIDE] and [DIRECT NAVIGATOR] from standby
mode will be longer.
27).
46, Copying from
101)
Advertisement
Table of Contents
