Switching The Aspect Ratio Of The Screen; Hold Function - Panasonic DMR-BWT740 Operating Instructions Manual

Switching the aspect ratio of the
screen
When the image does not match the screen size
of the TV, you can enlarge the image to fill the
screen.
1
Press [OPTION].
2
Select "Playback Settings" in "Playback
Menu", then press [OK].
3
Select "Aspect" in "Basic Operation", then
press [OK].
4
Select the item, then press [OK].
Normal:
Normal output
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
• This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
• It may also be adjusted using the screen mode of the TV
etc.
• The screen mode is switched to "Normal" in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• [BD-V] [DVD-V] "Side cut" does not have any effect.
• When "TV Aspect" ( 80) is set to "Pan & Scan" or
"Letterbox", the "Zoom" effect is disabled.

HOLD function

The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [RETURN
simultaneously until "X HOLD" appears on the
unit's display.
To cancel the HOLD function
Press and hold [OK] and [RETURN
simultaneously until "X HOLD" disappears.
Convenient functions
]
Unit's display
]
91
SQT0137