Others - Panasonic DMR-BCT835 Operating Instructions Manual

Convenient functions
Basic Settings
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access
this unit.
Remote device list
• To register equipment manually
1 Select the device name or the
MAC Address for the device you
want to register, then press [OK].
2 Select "Yes", then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select "Yes", then press
[OK]. l_l
• This function cannot be enabled when
"Automatic" is selected in "Registration type for
remote devices". (O above)
• The maximum number of equipment that can be
registered is 16.
98
VQT4W71

Others

Standby Settings
Quick Start
• On:
It is possible to start quickly from
standby mode.
• Off:
Power consumption in standby mode is
minimized. (O 117)
However, startup time from standby
mode will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set
time comes.
L_l
•
When "Home Network function" (O 97) or "Remote
Recording function" (O 97) is set to "On", the setting for
this function is fixed to "On".
•
If "Off' or "Timer Setting for Quick Start" is selected, the
setting for "Unit's Display" is fixed to "Automatic". (O 93)
•
The setting may be changed to "On" automatically
when the setting for video communication is changed.
(* 76)
Automatic Standby
Set the time to turn the unit to standby
mode automatically.
When the unit is not operating, the unit will
be turned to standby mode once the set
time has passed.
• When "REWIND LIVE TV" is set to "On"
(O 90), "Off' cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when
it is not operated for approximately 5
minutes after completing "Automatic
Stop" or "Recording Time" (O 32).