JVC 0397MKV*UN*SN Instructions Manual page 11

Jlip video capture docking station
Table of Contents

Advertisement

* S-Video output jack
•Outputs S-Video signal. (Also
compatible with S1 and S2
connectors.)
DC input jack
p. 13
* Video output jack
* Audio output jack [L]
* Audio output jack [R]
CAPTURE INPUT (EXT.)/PRINTER connector
p. 13
•Connect with the video output (stored image output) of the optional video printer. Even
when a TV is not connected to the video printer, this connection allows you to see the
images output from the video printer on the LCD screen while printing.
•The date and timecode are not shown on the LCD screen. If you want to print out the date
together with the images, connect a TV to the video output connector of the video printer
and operate it by referring to the TV screen.
•It is also possible to capture images from video equipment other than the GR-DVM1 or
GR-DVM801 by connecting the equipment to this connector. To make this operation
possible, also attach the GR-DVM1 or GR-DVM801 and set its power switch to record
mode without loading a tape.
* DC output jack
•For dealer use.
* Remote control sensor
•Receives the remote
control signals for the
attached Camcorder.
* EDIT jack
11
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lyt0002-0h6bGv-ds1

Table of Contents