Software Installation - TiVo Roamio I PRO Installation Manual

Before installing, TiVo Stream must have been activated on the same account as the
accompanying DVRs. TiVo Stream has its own TiVo Service Number on the bottom
of the unit.
Networking options:
TiVo Stream can only be connected to a home network using an Ethernet cable. This
connection can be anywhere on the network, but TiVo recommends placing the unit
in close proximity to the wireless router (see diagram below).
wired connection
(Ethernet or MoCA)
wireless
router
TiVo Premiere DVR
®
TiVoPro Tip
solution, TiVo Stream can plug directly into the Ethernet port on a 4-tuner
Premiere or 6-tuner Roamio DVR.

Software installation:

After connecting TiVo Stream to a home network, the TiVo app setup must be
completed on compatible portable devices. To finish this portion of the installation,
the following information is required: network SSID and passphrase from the wireless
network, and the Media Access Key (MAK) from the TiVo DVR. You can also log in using
your TiVo account email and password. You can locate the MAK on the DVR by navi-
gating to TiVo Central > Settings & Messages > Account & System Info > Media Access
Key. The MAK is located on the account information screen (see screenshot below).
Write down the Media Access Key.
# ____________-____________-____________-____________-________
TiVo Stream
When using a MoCA-enabled Whole Home network as an IP
mobile device
15