Table of Contents
Advertisement
Operating manual
Troubleshooting
Error
Engine does not start.
Motor suddenly stops.
The engine has no power or the
unit is not vacuuming/blowing.
Strong vibrations.
If you have any further questions, please contact your authorised dealer on site.
Cause
Connection cable not connected
or defective.
Household fuse overloaded.
Operating switch defective.
Plug has become loose.
Vacuum bag full.
Damaged vacuum/blow turbine. Have defective parts replaced by
Blocked vacuum/blow pipe.
Damaged vacuum/blow turbine
or other parts.
Remedial action
Check and plug in cable; if required replace
or have it repaired by a specialist.
Switch on fuse; if required increase the
fused house connection or have one
installed by a specialist.
Have it repaired by a specialist company
Check cable, ensure that it is attached to
the cord grip, insert plug again.
Empty the vacuum bag.
a specialist company.
Remove and clean vacuum/blow pipe.
Switch off the unit immediately.
Have defective parts replaced by
a specialist company.
English
9
Advertisement
Table of Contents
