Related Manuals for MTD FK 105
Summary of Contents for MTD FK 105
- Page 1 Front Sweeper FK 105 FORM NO. 769-03278A MTD Products Aktiengesellschaft • Saarbrücken • Germany...
-
Page 2: Table Of Contents
Operating Manual FK 105 Table of Contents Contents: ..................Page Unpacking / Mounting ..................3 For your safety ....................3 Use the machine properly.................. 4 Signs on the machine..................5 Maintenance ...................... 5 Technical data ....................5 Warranty......................5 Assembly ......................6 Mounting ...................... -
Page 3: Unpacking / Mounting
Operating Manual FK 105 The Front Sweeper Type FS 102/33 described below is only suitable for attachment to lawn tractors in the series 48../49../50.. and 51... Identification of the model number: The type plate is located under the driver's seat. The fifth and sixth positions of the model number are the series. -
Page 4: Use The Machine Properly
Operating Manual FK 105 Use the machine properly This machine is intended for use − as a front sweeper for lawn tractors for sweeping domestic and leisure property − according to the specifications and safety instructions contained in this operating manual. -
Page 5: Signs On The Machine
Operating Manual FK 105 Signs on the machine Important: Important: Read the operating Danger of injury / damage to instructions before the machine. The maximum starting up. speed of 6 km/h must not be exceeded. Keep third parties out of the danger zone. -
Page 6: Assembly
Operating Manual FK 105 Mounting Preparing the lawn tractor for mounting the front sweeper For technical safety reasons, a cable bridge according to the instructions below must be installed for the attachment of the sweeper. The installed cable bridge between brake switch and seat safety switch ensures that the engine always automatically switches off as soon as the operator leaves the driver's seat. - Page 7 Operating Manual FK 105 4. Open the black cable harness sheath from the wiring harness to the brake switch (between step and frame) and expose the yellow/white cable. right footboard 5. Connect the free end of cable "A" to the yellow/white cable with a branch connector "B".
- Page 8 Operating Manual FK 105 9. Lower the mower on to e.g. squared timber so that the strain relief clamp on the front side of the deck is not stressed. 10. Unbolt the strain relief clamp from the cross member "D" on the front of the machine and replace it with the supplied deck suspension "E".
- Page 9 Operating Manual FK 105 ___________________________________________________________________________ 13. Before the sweeper can be coupled, the connection pieces for the MTD "Fast Attach System" must be bolted on. Match the parts to the correct side according to the illustration and attach each part using 2 bolts, 2 washers and 2 nuts.
-
Page 10: Mounting
Operating Manual FK 105 Attachment of the front sweeper 1. Place the sweeper in position in front of the lawn tractor. Turn the locking element "G" flat as shown in the picture. Hold the knob "H" with your left hand and the bracket "J"... - Page 11 Operating Manual FK 105 3. Now swivel the locking elements "G" so that they engage in the holes of the side plates. Go in front of the sweeper, hold the front edge of the brush deck and lift this until the locking elements audibly engage in the tractor bore holes of the Fast-Attach-System.
-
Page 12: Removal
Operating Manual FK 105 Removal of the front sweeper 1. Switch off the engine of the tractor. The sweeper is raised. Wait until all parts are at a standstill. Let the exhaust area cool down or use suitable work gloves. -
Page 13: Operation
Operating Manual FK 105 Operation of the front sweeper 1. The sweeper is raised or lowered with the lifting tube "M". For raising, the bar is simply moved up and down in relation to the step using the handle until the sweeper completely engages in the "top position". -
Page 14: Spare Parts List
Operating Manual FK 105 Spare Parts List Tafel 1 MTD FK 105... - Page 15 Operating Manual FK 105 Spare Parts List MTD FK 105 Tafel 1 Pos. Artikel-Nr. Bezeichnung Pos. Artikel-Nr. Bezeichnung ohne Kehrbürstenwalze 33-10P 4HM-Q06 4HO-A08 Z1 6kt-Schraube M6x16 =1m) Abb. Bürstendeck MTD 100 FKT-167 Scheibe, groß Ø 6 4HW-B06 Z1 FKT-261 Bürstengetriebe MTD Führungsstift...
- Page 16 Operating Manual FK 105 Spare Parts List Tafel 2 MTD FK 105...
- Page 17 Operating Manual FK 105 Spare Parts List MTD FK 105 Tafel 2 Pos. Artikel-Nr. Bezeichnung Pos. Artikel-Nr. Bezeichnung Kupplungsblech MTD li. Zugbügel M500 4DA-G27 Z FTS-179 Z 4DA-G26 Z Kupplungsblech MTD re. 4HW-B12 Z1 Scheibe, groß Ø 12 4HR-A12 Z1...