Managing User Data - Fiat Bravo User Manual

Notes
❒ You are only required to pair your mo-
bile phone a single time.
❒ You can pair up to five mobile phones,
to be used one at a time.
❒ On your paired mobile phone, the
®
Bluetooth setting must be turned on
in order to connect your mobile phone
with Blue&Me™ Nav.
❒ Before transferring your mobile phone
contacts to the hands-free system,
make sure that each contact first and
last name is unique and distinctly rec-
ognizable so that the voice recognition
system will function properly.
❒ The system will download only valid
contact entries. A valid contact entry
must include both a name and at least
one phone number.
❒ If you would like to re-pair your mobile
phone, delete the old pairing relation-
ship first. During this operation all user
data will be deleted. To delete the old
pairing relationship, use the menu option
USER DATA, DELETE USERS.
On your mobile phone, delete
"Blue&Me" from the list of Blue-
®
tooth devices following the specific in-
structions for your mobile phone (re-
fer to your mobile phone owner's man-
ual).
❒ If you download a phonebook with a
contacts list including more than 1000
contacts, the system may operate slow-
er than expected and voice recognition
of the names in your phonebook may
degrade.
❒ If the pairing relationship is accidental-
ly deleted, the pairing procedure shall
be repeated.

MANAGING USER DATA

You can make adjustments to the user da-
ta used by the hands-free phone system.
Specifically, you can reset all user data for
paired phones, delete the phonebook or
reset both user data and phonebook
downloaded. In this way the system is
brought back to initial conditions. You can
also download either the phonebook or
single contacts from your mobile phone
to the system, if you chose not to down-
load the phonebook during the phone
pairing procedure. You can make adjust-
ments to the user data used by the system
using the option USER DATA.
?
To open the USER DATA menu
using manual interaction, proceed as
follows:
ß
Press /MAIN to open the Main
Menu, then select SETTINGS by
ß
pressing SRC/OK or
Select USER DATA and then press
ß
SRC/OK or /MAIN.
/MAIN.
51 51