Fiat Bravo User Manual page 50

You can create a pairing relationship us-
ing the USER PAIRING option in the
SETTINGS menu.
?
To create a pairing relationship us-
ing manual interaction, proceed as
follows:
ß
Press /MAIN to open the Main
Menu, then select SETTINGS by
pressing SRC/OK or
Select USER PAIRING and then
ß
press SRC/OK or /MAIN. The
system will start the pairing proce-
dure.
The system shows the mobile
phone pairing PIN on the instru-
ment panel display and repeats it.
Please note that this is a PIN used
just for this operation, it is not your
SIM PIN.
For the next two steps, consult your
mobile phone owner's manual about
®
Bluetooth pairing.
On your mobile phone, query for
devices equipped with Bluetooth
wireless technology that are within
range (this option on your mobile
phone might be called Discover,
New Device, etc.). View the list of
Bluetooth
enabled
"Blue&Me" (item that identifies
Blue&Me™ Nav on your car).
ß
/MAIN.
When prompted by the mobile
phone, enter the PIN number
shown on the instrument panel dis-
play. If pairing is successful, the sys-
tem will say "Connecting" and
then the display will show the paired
mobile phone ID.
It is of vital importance to wait un-
til this confirmation message is dis-
played since pressing
&
/ESC at this time may cancel the
pairing process. If pairing fails, an er-
ror message will be displayed and
the pairing procedure shall be re-
peated.
At first pairing, the system will say
"Welcome" immediately after
connecting. This message will no
longer be heard at next pairing pro-
cedures.
®
®
wireless technology
devices and select
ß
/MAIN or
}
The system asks if you would like to
copy your paired phone phone-
book. It is recommended to copy it.
To start copying the phonebook,
ß
press SRC/OK or /MAIN; oth-
&
erwise press /ESC. You can down-
load your phonebook at a later time
using the menu option SET-
TINGS, USER DATA, PHONE-
BOOK.
For certain mobile phones the
phonebook is not copied automat-
ically, in this case you must send the
contacts in your mobile phone
phonebook to the hands-free phone
system using your mobile phone
keypad. If the hands-free phone sys-
tem asks you to do this, then per-
form this procedure following the
instructions specific to your mobile
ß
phone and press /MAIN when
you have finished.
Or, using voice interaction:
Press and pronounce "Settings",
wait shortly for feedback and then
pronounce "Pairing".
The system shows the mobile
phone pairing PIN on the instru-
ment panel display and repeats it.
49 49