Voice Commands - Fiat Bravo User Manual

VOICE COMMANDS

Voice commands can be pronounced by
the driver, which does not need to change
his/her normal driving position to be heard
by the system, since the microphone is
properly located and oriented to this pur-
pose.
Voice commands, which are words rec-
ognized by the system, are identified as
"keywords".
The hands-free phone system recognizes
and responds to a preset list of voice com-
mands. The list of available voice com-
mands depends on the keyword level that
you are currently on. The current list is al-
ways available by pressing
nouncing "Help" or, pronouncing "Help"
after whichever question of the system.
Blue&Me™ Nav also recognizes per-
sonalized versions of voice commands like
the name of a contact in your phonebook.
There is no voice training required for us-
ing voice commands with this system.
* Valid means that the keyword pronounced is included in the Blue&Me™ Nav "dictionary" and that can therefore be recognized
by the system for the concerned level.
16 16
To issue a voice command to the system,
press and wait for the tone indicating
that voice recognition is active. Then,
speak the command in your natural voice
at a moderate pace. When the system rec-
ognizes the command, it will acknowledge
your command by speaking a response or
acting on your command.
Voice commands are organized according
to three increasing levels: 1
rd
el and 3 level.
When a valid* 1
nounced, the system will activate 2
el keywords; when a valid 2
word is pronounced, the system will ac-
rd
tivate 3 level keywords.
and pro-
If the user pronounces a valid 1
word, then the submenu relevant to that
command will remain active until a key-
word leading to another level is given or
the interaction is interrupted; the same
rule applies for the other lower levels (2
rd
and 3 level).
For the list of available keywords, re-
fer to section VOICE COMMANDS
(KEYWORDS) - SUMMARY.
To repeat the last system voice an-
nouncement, press
second or press shortly and pronounce
"Repeat".
The system can issue voice announce-
ments. A voice announcement is a spoken
message initiated by the system. To can-
cel a voice announcement, press
or press
st nd
level, 2 lev-
A voice interaction is a two-way commu-
nication/spoken exchange between system
st
level keyword is pro- and user. To initiate a voice interaction,
nd
lev- press
nd
level key- rupt an ongoing interaction and start a
new interaction, press
ing the interaction and issue a voice com-
mand.
st
level key-
To stop an ongoing interaction press
&
/ESC. You will hear a tone indicating
when voice recognition is deactivated.
The hands-free kit help option can speak
nd
the list of commands available to you at
any time, depending on the keyword lev-
el that you are currently on. To use the
help system, say "Help Listen to the list
of currently available commands and de-
cide on which command you'd like to is-
sue to the system.
for longer than 1
&
/ESC,
and pronounce "Cancel".
and issue a command. To inter-
at any time dur-