Try Out The Voice Commands; Pair Your Mobile Phone - Fiat Bravo User Manual

TRY OUT THE VOICE
COMMANDS
At each stage of your dialogue with the
system, you can always use the voice com-
mand "Help", to get detailed indications
about the voice commands available at the
current dialogue stage.
To try out the "Help" function, proceed
as follows:
❒ Press the steering wheel button .
❒ After Blue&Me™ Nav plays a tone
indicating that voice recognition is ac-
tive, pronounce "Help". Blue&Me™
Nav will speak the list of voice com-
mands available.
❒ After the general help message is fin-
ished, pronounce "Settings" and then
"Help". Blue&Me™ Nav will speak
again the list of voice commands avail-
able for the SETTINGS menu.
❒ You can then pronounce one of the
available commands and proceed with
the dialogue as you like.
❒ If you need further help, press
pronounce again "Help".
12 12

PAIR YOUR MOBILE PHONE

IMPORTANT Carry out this operation
only with the car stopped.
To pair your mobile phone, proceed as
follows:
❒ Press
and pronounce "Settings"
then, at the end of the Blue&Me™
Nav message say "Pairing".
❒ The system will show the phone pair-
ing PIN number on the multifunction
display. For the next two steps, consult
your mobile phone owner's manual
®
about Bluetooth
❒ On your mobile phone, query for de-
vices equipped with Bluetooth
less technology (the setting on your
mobile phone might be called Discover
or New Device). In this list you will find
"Blue&Me" (name identifying the
Blue&Me™ Nav system on your car):
select it.
and
❒ When prompted by the mobile phone,
enter the PIN number shown on the in-
strument panel display using your mo-
bile phone keypad. If pairing is success-
ful, the system will say "Connecting"
and at the end the display will show as
confirmation message, the ID of the
paired mobile phone.
It is essential to wait until you see this con-
firmation message on the display. Pressing
ß
/MAIN or
is displayed may cancel the pairing process.
If the pairing process fails, an error mes-
sage will be displayed: in this event repeat
pairing.
the pairing procedure.
❒ At first pairing, Blue&Me™ Nav will say
®
wire-
"Welcome" immediately after connect-
ing. This message will no longer be heard
at next pairing procedures.
&
/ESC before the message