Selecting An Input Signal - Hitachi CP-X8150 User Manual

Operating

Selecting an input signal

Press INPUT button on the projector.
1.
Each time you press the button, the projector
switches its input port from the current port as
below.
COMPUTER IN1
VIDEO
S-VIDEO
COMPONENT
NOTE • If you have set SKIP to some ports from SOURCE SKIP in the
OPTION menu, the input from the ports cannot be selected (
• While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking the ports in above order repeatedly till an input signal is
65).
detected (
• It may take several seconds to project the images from the USB TYPE B port.
Press COMPUTER 1 / 2, LAN, USB TYPE A / B, HDMI 1 / 2, COMPONENT,
1.
S-VIDEO or VIDEO button on the remote control.
The port corresponding to each button is selected as below.
Button
COMPUTER 1
COMPUTER 2
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
COMPONENT
S-VIDEO
VIDEO
NOTE • While ON is selected for AUTO SEARCH item in OPTION menu,
the projector will keep checking every port sequentially till an input signal is
65).
detected (
• It may take several seconds to project the images from the USB TYPE B port.
26
COMPUTER IN2
HDMI 2 HDMI 1
Ports
COMPUTER IN1
COMPUTER IN2
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
COMPONENT
S-VIDEO
VIDEO
LAN
USB TYPE A
USB TYPE B
INPUT button
65).
Buttons for input
ports