Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D&B E9
Summary of Contents for D&B E9
- Page 1 Manual (3.1 EN)
-
Page 2: Table Of Contents
Symbols on the equipment Please refer to the information in the operating manual. WARNING! Dangerous voltage! Contents Safety precautions...............3 Information regarding use of loudspeakers..........3 E9 ..................4 Connections......................4 Operation with D6 or D12................5 Operation with E-PAC..................5 Operation with P1200A..................6 Dispersion characteristics.................6 Technical specifications..................7 Manufacturer's declarations..........8... -
Page 3: Safety Precautions
Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. E9 Manual (3.1 EN) Safety precautions - 1... -
Page 4: Connections
12" LF driver passively connected to a 2" HF compression driver. This is coupled to a vertically asymmetrical 90° x 50° CD horn. The asymmetry of the HF horn means that the E9 has a vertical coverage pattern with a downward tilt. The actual vertical dispersion is 20°... -
Page 5: Operation With D6 Or D12
Select the controller setup E9. Within the D12 amplifier this is available in "Dual Channel" and "Mix TOP/SUB" mode. Up to a total of two E9 loudspeakers can be driven by each D6 or D12 IMPORTANT! amplifier channel. In applications with low continuous levels and low ambient temperatures up to three cabinets can be connected to a D12 channel. -
Page 6: Operation With P1200A
Operation with P1200A Up to two E9 cabinets can be driven by each P1200A power amplifier channel fitted with an E9 controller module. Fitting one E9 and one subwoofer controller module allows a single mainframe to drive two E9 cabinets and two active subwoofer cabinets. -
Page 7: Technical Specifications
Components......................12" driver BX and CUT switch settings ......................2" compression driver Connections.......................2 x EP5 Pin assignments........................1/2 optional........................2 x NL4 Pin assignments......................1+/1– Weight......................26 kg (57 lb) Fig. 8: E9 cabinet dimensions in mm [inch] E9 Manual (3.1 EN) Page 7 of 8... -
Page 8: Manufacturer's Declarations
Manufacturer's declarations EU conformity of loudspeakers (CE symbol) This declaration applies to: d&b E9 loudspeaker, Z2250 manufactured by d&b audiotechnik GmbH. All production versions of this type are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
Need help?
Do you have a question about the E9 and is the answer not in the manual?
Questions and answers