Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D&B E12
Summary of Contents for D&B E12
- Page 1 E12/E12-D Manual 2.1 en...
- Page 2 General information E12/E12-D Manual Version: 2.1 en, 09/2017, D2031.EN .02 Copyright © 2017 by d&b audiotechnik GmbH; all rights reserved. Keep this manual with the product or in a safe place so that it is available for future reference. When reselling this product, hand over this manual to the new owner.
-
Page 3: Table Of Contents
2.3. Operation................6 2.3.1. Controller settings..............7 2.3.2. Operation with E-PAC............7 2.4. Dispersion characteristics............8 2.5. Technical specifications............10 Manufacturer's Declarations........12 3.1. EU conformity of loudspeakers (CE symbol)....... 12 3.2. WEEE Declaration (Disposal)..........12 d&b E12/E12-D Manual 2.1 en... -
Page 4: Safety Precautions
Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. d&b E12/E12-D Manual 2.1 en... -
Page 5: E12 Loudspeaker
It is available in two different dispersion versions, the E12 providing a 80° x 50° dispersion pattern (hor. x vert.), the E12-D a wider 110° x 50° pattern. Both horns can easily be rotated through 90°... -
Page 6: Operation
In Dual Channel mode, the "X" setup can be selected to drive the cabinet in combination with the E15X subwoofer on the same channel. The setup provides a dedicated correction for the combined frequency response of the system. d&b E12/E12-D Manual 2.1 en... -
Page 7: Controller Settings
+5 dB) and can be set when the system is used in full range mode without subwoofers. 2.3.2. Operation with E-PAC Selecting E12 or E12-D mode enables the E-PAC to drive one E12 Frequency response correction of the CPL function or E12-D loudspeaker. LO IMP mode configures the E-PAC to drive a maximum of two E12 or E12-D loudspeakers with a 6 dB reduction in input level to the loudspeakers. -
Page 8: Dispersion Characteristics
–6 dB and –12 dB. Isobar diagram E12 vertical, standard setup Isobar diagram E12 horizontal, standard setup Isobar diagram E12 horizontal, horizontal setup with the Isobar diagram E12 vertical, horizontal setup with the horn horn rotated rotated d&b E12/E12-D Manual 2.1 en... - Page 9 Isobar diagram E12-D vertical, standard setup Isobar diagram E12-D horizontal, standard setup Isobar diagram E12-D horizontal, horizontal setup with the Isobar diagram E12-D vertical, horizontal setup with the horn rotated horn rotated Altering the HF horn dispersion The HF horn can be rotated through 90° within the coaxial driver assembly.
-
Page 10: Technical Specifications
131/130 dB with D12/D20/30D 134/133 dB with D80 134/133 dB (SPLmax peak, pink noise test signal with crest factor 4) E12 frequency response, standard and CUT modes. E12/E12-D loudspeaker Nominal impedance 8 ohms Power handling capacity (RMS/peak 10 ms) 300/1600 W Nominal dispersion angle (hor. - Page 11 E12/E12-D cabinet dimensions in mm [inch] d&b E12/E12-D Manual 2.1 en...
-
Page 12: Manufacturer's Declarations
Please dispose of this product according to the respective national regulations or contractual agreements. If there are any further questions concerning the disposal of this product, please contact d&b audiotechnik. d&b E12/E12-D Manual 2.1 en... - Page 14 www.dbaudio.com...