Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D&B MAX2
Summary of Contents for D&B MAX2
- Page 1 MAX2 Manual 1.2 en...
- Page 2 General information MAX2 Manual Version: 1.2 en, 03/2016, D2987.EN .01 Copyright © 2016 by d&b audiotechnik GmbH; all rights reserved. Keep this manual with the product or in a safe place so that it is available for future reference. When reselling this product, hand over this manual to the new owner.
-
Page 3: Table Of Contents
2.1. Product description..............5 2.2. Connections................5 2.3. Operation................6 2.3.1. Controller settings..............6 2.4. Dispersion characteristics............7 2.5. Technical specifications............8 Manufacturer's declarations........9 3.1. EU conformity of loudspeakers (CE symbol)......9 3.1.1. WEEE Declaration (Disposal)..........9 d&b MAX2 Manual 1.2 en... -
Page 4: Safety Precautions
Generally speaking, a distance of 0.5 m (1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. d&b MAX2 Manual 1.2 en... -
Page 5: Max2 Loudspeaker
75° constant directivity HF dispersion. With a frequency response extending from 55 Hz to 20 kHz, the MAX2 can be used individually as a full range system, or it can be supplemented by different d&b subwoofer systems such as the Y- SUB, V-SUB or B6-SUB. -
Page 6: Operation
Applicable d&b amplifiers: D80/D20/D12/D6/10D/30D. As an alternative, the MAX2 can be driven by other high quality linear power amplifiers, providing their output power does not exceed 800 W into 8 ohms and an additional subsonic filter is used (25 Hz with 12 dB/octave minimum). Otherwise there is a risk of damaging the loudspeaker components. -
Page 7: Dispersion Characteristics
2.4. Dispersion characteristics Due to the conical coverage pattern of the coaxial driver design, the horizontal and vertical dispersion characteristics of the MAX2 are largely identical (slight differences which occur are attributable to the cabinet shape). The diagram below shows dispersion angle versus frequency plotted using lines of equal sound pressure (isobars) at –6 dB and –12 dB. -
Page 8: Technical Specifications
2 x NL4 or EP5 Pin assignment NLT4 F/M and NL4: 1+/1– EP5: 1: + / 2: – Weight 23 kg (50 lb) MAX2 frequency response (linear setup, free field), standard and MAX2 cabinet dimensions in mm [inch] d&b MAX2 Manual 1.2 en... -
Page 9: Manufacturer's Declarations
Please dispose of this product according to the respective national regulations or contractual agreements. If there are any further questions concerning the disposal of this product, please contact d&b audiotechnik. d&b MAX2 Manual 1.2 en... - Page 10 www.dbaudio.com...