1. Manuals
  2. Brands
  3. D&B Manuals
  4. Speakers
  5. xC 16C
  6. Manual

D&B xC 16C Manual

Manual 1.3 en
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
xC
16C
Manual 1.3 en

Advertisement

Table of Contents
loading

Related Manuals for D&B xC 16C

Summary of Contents for D&B xC 16C

  • Page 1 Manual 1.3 en...
  • Page 2 General information 16C Manual Version: 1.3 en, 02/2016, D2619.EN .01 Copyright © 2016 by d&b audiotechnik GmbH; all rights reserved. Keep this manual with the product or in a safe place so that it is available for future reference. When reselling this product, hand over this manual to the new owner.

  • Page 3: Table Of Contents

    Contents Safety precautions............4 1.1. Information regarding the use of loudspeakers....4 16C loudspeaker.............. 5 2.1. Product description..............5 2.1.1. Cardioid dispersion............. 5 2.1.2. Dispersion characteristics............ 6 2.1.3. Directivity index (dB)............6 2.2. Connections................7 2.3. Operation................7 2.3.1. Controller settings..............7 2.4.

  • Page 4: Safety Precautions

    1. Safety precautions 1.1. Information regarding the use of loudspeakers Potential risk of personal injury Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound levels (from approx.

  • Page 5: C Loudspeaker

    2. 16C loudspeaker 2.1. Product description The 16C is a passive 2-way column loudspeaker housing four 4” neodymium drivers and a 0.75” compression driver mounted on a CD horn. In the vertical plane, the cabinet provides directivity control down to 500 Hz. The HF horn has a nominal dispersion of 90°...

  • Page 6: Dispersion Characteristics

    2.1.2. Dispersion characteristics The following graphs show dispersion angle over frequency of a single cabinet plotted using lines of equal sound pressure (isobars) at –6 dB and –12 dB. Isobar diagram 16C vertical Isobar diagram 16C horizontal 2.1.3. Directivity index (dB) d&b 16C Manual 1.3 en...

  • Page 7: Connections

    2.2. Connections 16C cabinets are fitted with a 4-pole Phoenix Euroblock connector block accepting a 2-pole Phoenix Euroblock screw terminal connector (cross-section up to 4 mm /AWG 11). The connector uses the pin assignments 1: + and 2: —. Pins 3 and 4 are not connected.
  • Page 8 HFA circuit In HFA mode (High Frequency Attenuation), the HF response of the system is rolled off. HFA provides a natural, balanced frequency response when a unit is placed close to listeners in near field or delay use. High Frequency Attenuation begins gradually at 1 kHz, dropping by approximately 3 dB at 10 kHz.

  • Page 9: Technical Specifications

    2.4. Technical specifications 16C system data Frequency response (–5 dB standard) 110 Hz - 18 kHz Max. sound pressure (1 m, free field) 16C with 10D/30D/D6/D12/D20/D80 122 dB (SPLmax peak, pink noise test signal with crest factor of 4) 16C frequency response, standard and CUT modes 16C loudspeaker Nominal impedance 12 ohms...

  • Page 10: Manufacturer's Declarations

    3. Manufacturer's declarations 3.1. EU conformity of loudspeakers (CE symbol) This declaration applies to: d&b 16C loudspeaker, Z1720 manufactured by d&b audiotechnik GmbH. All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
  • Page 12 www.dbaudio.com...

Table of Contents