Setting The Voltage Selector Switch; Connecting The Power Cord - JVC TH-M508 Instructions Manual

Connections
Setting the VOLTAGE
SELECTOR switch
To avoid damaging the powered subwoofer, set the VOLTAGE
SELECTOR switch to the voltage of your area.
When you change the position of the VOLTAGE SELECTOR
switch, use a tool such as a slotted screwdriver, etc.
CAUTION
DO NOT plug the power cord of the powered subwoofer
before setting the VOLTAGE SELECTOR switch to the
correct voltage.
SP-PWM508
SP-PWM303 (except for Australia)
13
Connecting the power
cord
Make sure that all other connections have been completed.
Center unit
Power cord
(supplied)
Plug into AC outlets.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
• If the AC outlets do not match the AC plugs, use the supplied AC plug
adaptors.
Powered
subwoofer
Power cord