JVC SP-THA35 Instructions Manual page 13

TV connection
The S-video cord and the SCART cable are not supplied with this system.
Use the cords or cables supplied with the other component or purchase them at an electric appliance store.
Video cord (supplied)
A
B
S-video cord (not supplied)
You can select one of three connection types—
For using the composite video cord or S-video cord
• If your TV has S-video (Y/C-separation) jack, connect it using an
S-video cord (not supplied)
By using this jack, you can get a better picture quality than using
composite video cord connection
• When you use the S-video cord to connect the TV, you select
the video signal type correctly. See "Picture Menu" on page 54.
For using the SCART cable (
If you use the SCART cable to connect the TV, you select the video
signal type correctly. See "Picture Menu" on page 54.
CENTER REAR FRONT
SUBWOOFER SPEAKER SPEAKERS SPEAKERS
RIGHT LEFT RIGHT LEFT
AC IN
Notes:
• Keep the power cord away from the connecting cords and the antenna cords. The power cord may cause noise or screen interference.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
C
A B
, , and
B
.
A
.
C )
VIDEO OUT
VIDEO
S-VIDEO
ANALOG
IN
AUX
OPTICAL
DIGITAL IN
AV
Now, you can plug the power cord of the center unit into the AC outlet.
SCART cable (not supplied)
C
• S-video (Y/C-separation) signal does not output from the AV
.
(SCART) connector.
If you want to use S-video (Y/C-separation) signal, connect the
TV using an S-video cord (not supplied)
• If you use the SCART cable to connect the TV, you can enjoy
the sound with TV speakers.
When you play back a DVD and select the speaker settings to
2.1 ch (see page 21), the front left and right, center, and rear
channel signals are down-mixed and then output from the AV
(SCART) connector.
Otherwise, the front left, right channel signals are output from the
AV (SCART) connector.
A
B
A
N
VIDEO OUT
T
E
N
AM
COAXIAL
N
AM LOOP EXT
L
VIDEO A FM 75
R
S-VIDEO
AV
C
.
B
TV
9