System Requirements - QSC DCM series User Manual

III. SYSTEM REQUIREMENTS
DCM Commander software is designed to control only one DCM hardware unit at a time. In order to test
the functionality of this software together with the DCM hardware unit, you must have at least the
following:
A QSC DCM Digital Cinema Monitor unit
The DCM Commander software diskettes or CDROM
®
An IBM -compatible PC with at least a 486 (or equiv) processor
Windows 95 or Windows 98
Minimum 16MB of RAM
Minimum 1MB of available hard disk storage space
A 3.5" 1.44MB floppy drive ro CDROM drive (depending on software provided)
An available RS-232 serial port
A display capable of at least 640X480 resolution in 16 colors.
A standard DB9 RS-232 cable (male to female)
To complete a full Cinema System, you will also need a cinema processor, QSC DCA amplifiers, speakers,
and cables.
2