Surround; Security - QSC DCM series User Manual

d Surround
This screen presents the surround processing options. Standard versions allow external
processing of the surrounds using products such as the Dolby SA-10. DCM-2 and
DCM-3 "Active Surround Ready" configuration options will be shown here if this feature
is installed.
e Security
Password security is available for situations where you want to keep your system set-
tings confidential. If you select and enable the Secure mode by writing to the DCM, a
password will be required before using the command Get Configuration from DCM
(see Communications). If you are trying to change a setting in a DCM unit which has
Secure settings and you do not have the password to retrieve these settings, you have
two options: 1) obtain the backup diskette with these files (files are not password pro-
tected), load them into the DCM Commander, change the password (or select Unse-
cure), and then download your settings using the Write Configuration to DCM
command or 2) completely reprogram the parameter settings in the DCM Software and
22