Network Connectivity Test Results - Sony Bravia KD-65X9005B Manual

Network Connectivity Test Results

The test results are "Failed"/"Failed"/"Failed".
The test results are "OK"/"Failed"/"Failed".
The test results are "OK"/"OK"/"Failed" or "OK"/"OK (IPv6 Only)"/"Failed".
The test results are "OK"/"OK (IPv6 Only)"/"OK (IPv6 Only)" or "OK"/"OK"/"OK (IPv6 Only)".
The test results are "Failed"/"Failed"/"Failed".
When using the wired LAN function, make sure that the cable is firmly connected.
When using the wireless LAN function, unplug the TV from the AC power, wait for a while, then
plug it in again.
The test results are "OK"/"Failed"/"Failed".
The router function of your router may be turned off. Turn it on and try again.
When using the wireless LAN function, check the items below:
- If [Wireless Device on TV] is set to [Off], set [Built-in Wi-Fi] to [On].
- An incorrect security (WPA or WEP) key may have been entered. Make sure that the correct
security key is entered.
- If you select a network (SSID) from the scan list, ensure that you select a correct network
(SSID). If you enter an SSID manually, make sure that you enter the correct SSID.
- To find the correct security key and SSID, consult with the person who set up your network or
refer to the router's instruction manual or website, or consult the router's manufacturer.
- If you configured the TV's wireless LAN function to connect to a wireless router (or access
point) at 5GHz, the connection with the wireless router is disconnected while [Wi-Fi Direct] is
[On]. When you turn off [Wi-Fi Direct], the connection will automatically recover.
The test results are "OK"/"OK"/"Failed" or "OK"/"OK (IPv6 Only)"/"Failed".
Your router (broadband router) may be incorrectly set up to connect to your Internet service
provider (such as an incorrect PPPoE setting). To set up your router correctly, refer to the
router's instruction manual or website, or consult the router's manufacturer. If you are uncertain
about the set-up information of your provider (such as your account name and password),
consult your provider.
The test results are "OK"/"OK (IPv6 Only)"/"OK (IPv6 Only)" or
"OK"/"OK"/"OK (IPv6 Only)".
Your TV uses only IPv6 to establish an Internet connection, and may not be able to use certain
network functions. Your router (broadband router) or Internet service provider may support only
IPv6. Refer to the router's instruction manual or website, or consult the router's manufacturer to
check whether the router supports IPv4. If you are uncertain whether your contract includes the
IPv4 connection, consult your provider.
© 2014 Sony Corporation
Top Page > Troubleshooting > Network Connectivity Test Results
List of Contents