To Replace The Battery - Sony Bravia KD-65X9005B Manual

[3D Depth Adjustment]
Adjusts the depth of 3D pictures on the screen (available only for content with 3D signals). Select
[Auto(High)] to always optimise to a visually comfortable depth. Select [Auto(Low)] to provide a
visually comfortable depth which is close to the original picture. You can also manually set the
adjustment value.
[Simulated 3D Effect]
Heightens/lessens the 3D effect when you display 2D pictures in simulated 3D.
[3D Glasses Brightness]
Sets the image brightness when using the 3D display mode. By selecting [Auto], image
brightness through the Active 3D Glasses is automatically adjusted in conjunction with the
[Picture Mode] setting.
[Auto 3D]
Select [Auto 1] to switch the 3D display mode automatically when a 3D signal is detected.
If no 3D signal is detected, select [Auto 2], which will analyse the image for 3D information and
switch the 3D display mode automatically.
Select [Off] to prevent the 3D display mode from being automatically selected.
Depending on the input signal or format, the 3D display mode may not switch automatically.
In such a case, press the 3D button to select the 3D display mode manually.
(When using the Touchpad Remote Control, press the Control Bar (
highlight the 3D button, then press the touchpad to select.)
[3D Signal Notification]
Notifies when a 3D signal is detected.

To replace the battery

If the LED indicates low battery power (indicator blinks green (yellow when SimulView™ mode) 3
times every 2 seconds), replace the battery. Use a CR2025 battery only. Press the unlock button
with the tip of a pen, etc, and take out the battery case, then replace the battery with a new one.
After that, be sure to lock the battery case again.
Tips
If you wear glasses, remove the nose pad from the Active 3D Glasses by pulling it
down, then wear them over your glasses.
Notes
When [3D Display] is set to [Off], SimulView™ mode cannot be used.
Depending on the image, one player may see another player's image when using SimulView™
mode.
3D effect is available only when pictures are displayed in full screen.
If [Motionflow] is set to other than [Off], the smooth movement of the picture may be lost as the
picture process to minimise screen flicker is applied. In such a case, set [Motionflow] to [Off] to
display the original picture.
Recommended viewing angle and distance may vary depending on the TV's location and room
conditions.
Simulated 3D effect may be less pronounced with some picture sources.
Perceived simulated 3D effect may vary from person to person.
4K 3D signal is not detected.
3D effect or SimulView™ effect may be less pronounced if the ambient temperature is low.
Maintenance of your glasses
- Wipe the glasses gently with a soft cloth.
- Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap
and warm water.
), slide the touchpad to