Sony Bravia KD-65X9005B Manual page 43

3.
Display the content to watch in 3D on the TV screen.
4.
Put the Active 3D Glasses on.
While watching a 3D image, the
If no 3D effect is achieved, perform the following steps.
5.
Press the 3D button to display the [3D Display] screen.
(When using the Touchpad Remote Control, press the Control Bar (
highlight the 3D button, then press the touchpad to select.)
6.
Press the 3D button repeatedly to select the [3D Display] mode to suit the displayed content.
(When using the Touchpad Remote Control, press the Control Bar (
highlight the 3D button, press the touchpad, slide the touchpad to highlight the desired [3D
Display] mode, then press the touchpad.)
[3D (Side-by-Side)]: Displays side-by-side pictures in 3D.
[3D (Over-Under)]: Displays over-under pictures in 3D.
[3D (Simulated 3D)]: Displays regular 2D pictures in simulated 3D.
[2D (Left-Only)]: When the same picture is side-by-side, the left side picture is shown expanded,
in 2D.
[2D (Top-Only)]: When the same picture is over-under, the upper picture is shown expanded, in
2D.
Depending on the input signal or format, [3D (Side-by-Side)]/[3D (Over-Under)]/[2D (Left-
Only)]/[2D (Top-Only)] may not be selectable.
To turn off the Active 3D Glasses
Press down on the (power) button of the Active 3D Glasses for 2 seconds. If no signal from the
TV is detected for more than 1 minute, the Active 3D Glasses will turn off automatically. To turn
them on again, press the
To use the Active 3D Glasses with another TV
It is required to re-register the Active 3D Glasses. Turn off the Active 3D Glasses, then perform
step 2.
To deactivate the 3D effect
Press the 3D button repeatedly to select [Off] in [3D Display].
(When using the Touchpad Remote Control, press the Control Bar (
highlight the 3D button, press the touchpad, slide the touchpad to highlight [Off] in [3D Display],
then press the touchpad.)
To use the SimulView™ mode
(The availability of this function depends on your model.)
SimulView™ allows two players to view independent screen images in full screen while playing the
same game on a shared screen. The image is displayed in 2D. To use this feature, the game
software must support SimulView™.
When using this mode, the Active 3D Glasses automatically change to SimulView™ mode. Press
the button on the Active 3D Glasses to switch between players as follows.
Mode: SimulView™ mode (Player 1) ←→ SimulView™ mode (Player 2)
Indicator: Yellow LED blinks once every 2 seconds with SimulView™ mode (Player 1) ←→
Yellow LED blinks twice every 2 seconds with SimulView™ mode (Player 2)
To adjust the 3D settings
You can adjust the following 3D settings.
Press the HOME button, select
option.
[3D Display]
Opens [3D Display] to switch the display modes.
[3D Depth Adjustment]
(Power) indicator blinks green every 2 seconds.
(power) button.
[Settings] → [Display] → [3D Settings] → the desired
), slide the touchpad to
), slide the touchpad to
), slide the touchpad to