Clutch Fluid; Window Washer Fluid; Hood Latch Check; Keyless Entry System - Subaru 2001 LEGACY Service Manual

Pre-delivery Inspection
17. COOLANT
SA09719G5017
Check the coolant amount on the reservoir. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of coolant
with the specified concentration.

18. CLUTCH FLUID

Check the clutch fluid amount. If the amount is
insufficient, check that no leaks are found. Then,
add the necessary amount of the specified fluid.

19. WINDOW WASHER FLUID

Check the window washer fluid amount. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of washer
fluid commercially available.

20. HOOD LATCH CHECK

Retract the hood stay and close the hood. Check
that the hood is securely latched.
PRE-DELIVERY INSPECTION
SA09719G5018
GI0090A
SA09719G5019
SA09719G5020

21. KEYLESS ENTRY SYSTEM

Check the keyless entry system operations as fol-
lows.
¼ Remove the key from the ignition switch and
close all the doors including rear gate (wagon).
¼ Press the "LOCK" button on the transmitter
momentarily once and check if all the doors are
locked and the hazard light flashes ones.
¼ Press the "OPEN" button on the transmitter
momentarily once and check if the driver's door is
unlocked, the hazard light flashes twice and the
dome light illuminates.
¼ Close all doors and rear gate, press the "LOCK"
button of the transmitter. Press the "OPEN" button
of the transmitter and wait for 30 seconds. Check
that all doors and the rear gate are automatically
locked again.
22. SEAT
SA09719G5023
Check that each seat provides full functionality in
sliding and reclining. Check all available functions
of the rear seat such as a trunk-through center arm
rest.
23. SEAT BELT
Pull out the seat belt and then release it. Check
that the belt webbing retracts smoothly.
24. WHEEL ALIGNMENT
Check the wheel alignments. <Ref. to FS-6 Wheel
Alignment.> and <Ref. to RS-8 Wheel Alignment.>
PI-8
SA09719G5021
B5M1182
SA09719G5024
SA09719G5026