Kia 2013 Soul Owner's Manual page 372

Front side marker
Follow the steps 1 to 5 from the pre-
vious page.
6.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
7.Pull the bulb out of the socket.
8.Insert a new bulb into the socket.
9.Install the socket into the assembly
by aligning the tabs on the socket
with the slots on the assembly and
turning the socket clockwise.
OAM072072N
Front fog light bulbs (if equipped)
1.Loosen the retaining bolt.
2.Pull out the end of the front
bumper.
OAM072074N
3.Reach your hand into the back of
the front bumper.
4.Disconnect the power connector
from the socket.
5.Remove the bulb-socket from the
housing by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
OAM072064
the housing.
6.Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the hous-
ing. Push the socket into the hous-
ing and turn the socket clockwise.
7.Connect the power connector to
the socket.
8.Reinstall the front bumper.
Maintenance
OAM072075N
7 71