Kia 2013 Soul Owner's Manual page 136

Features of your vehicle
• Never place anything over sensor
(1) located on the instrument
panel. This will ensure better auto-
light system control.
• Don't clean the sensor using a win-
dow cleaner. The cleaner may
leave a light film which could inter-
fere with sensor operation.
• If your vehicle has window tint or
other types of metallic coating on
the front windshield, the Auto light
system may not work properly.
4 64
High beam operation
To turn on the high beam headlights,
push the lever away from you. Pull it
back for low beams.
The high beam indicator will light
when the headlight high beams are
switched on.
To prevent the battery from being
discharged, do not leave the lights
on for a prolonged time while the
engine is not running.
OAM049044
To flash the headlights, pull the lever
towards you. It will return to the nor-
mal (low beam) position when
released. The headlight switch does
not need to be on to use this flashing
feature.
WARNING
Do not use high beam when
there are other vehicles. Using
high beam could obstruct the
other driver's vision.
OAM049043
- High beams